Worcester 40 CDI conventional Boiler | Boilers | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Worcester 40 CDI conventional Boiler in the Boilers area at Plumbers Forums

Status
Not open for further replies.
D

Danv44444

Hi Guys, I got called to look at the above boiler last week because the boiler would not stay ignited. The Flame kept fluctuating then eventually went to lockout. I phoned Worcester technical and tested evrything as they said but still couldnt find anything to fix it.

In the end the customer paid for worcster to come out and fix it for £250. The customer isnt very technical put said the worcester guy said it was something simple.

Have any of you guys ever come across this with worcesters before. I checked the gas valve, fan, Flue and cleaned the heat exchanger.

Any help for future reference would be appreicated.
 
Hi Guys, I got called to look at the above boiler last week because the boiler would not stay ignited. The Flame kept fluctuating then eventually went to lockout. I phoned Worcester technical and tested evrything as they said but still couldnt find anything to fix it.

In the end the customer paid for worcster to come out and fix it for £250. The customer isnt very technical put said the worcester guy said it was something simple.

Have any of you guys ever come across this with worcesters before. I checked the gas valve, fan, Flue and cleaned the heat exchanger.

Any help for future reference would be appreicated.

how old?
Did it throw an F code or EA?
 
Hi Vern, Installed in 2007 and fault code fo. it also flased up ea
 
Guys, open forum!

Can you please both PM Mr Doberman with your gsr details so topics like this can be discussed in the gsr engineers private forum?

You'll also gain access to the plumbers arms where much quaffing and merriment goes on!

ta muchly!
 
Guys, open forum!

Can you please both PM Mr Doberman with your gsr details so topics like this can be discussed in the gsr engineers private forum?

You'll also gain access to the plumbers arms where much quaffing and merriment goes on!

ta muchly!
Will do pal
 
hi Croppie, I am in the gsr forum already. Sorry i thought this post was in there??? I sent a message off a while ago but cant get in the plumbers in arms?
 
Can you pm him again please Danv? if he added you to both your name would go red and you'd have Gas Safe Registered under your picture too.

Cheers mate.
 
Is the the correct message address " Mr Doberman". ? Not being funny just want to be sure?
 
Status
Not open for further replies.

Similar plumbing topics

It worked! Brilliant and amazing! This has...
Replies
4
Views
1K
As above. Sounds like it needs a good service.
Replies
7
Views
7K
I have the same problem as the person to whom...
Replies
9
Views
12K
D
  • Locked
Ensure condensate trap is clean on these, as...
Replies
5
Views
89
V
Back
Top