U
Ultimate
Hi, I'm trying to solve a problem with a boiler for a customer, which I can't even establish the model number of.
There is no model number stamped on the boiler, and the customer has lost all documentation, so here is what I do know about the boiler. It is a condensing combi boiler which I estimate to be around 3 years old. It has the mechanical type timer, but from all pictures I can find, lots of models look identical...
I'm hoping that this may be enough info for the problem to be identified as I'm guessing most of this range will have the same arrangement of inlets/outlets.
The customer has already called out the installers of the boiler, who have said the boiler is fine but there are two mains water feeds going to the unit causing an imbalance of pressures.
The taps in the bathroom/kitchen are fine, but when a higher demand of heated water is needed (shower/bath) the higher temperature cannot be achieved/maintained and the boiler can be heard turning itself on and off which would explain the water fluctuating between hot and cold.
Any help would be appreciated, especially if someone has a pipe work connection diagram!
Thanks in advance
There is no model number stamped on the boiler, and the customer has lost all documentation, so here is what I do know about the boiler. It is a condensing combi boiler which I estimate to be around 3 years old. It has the mechanical type timer, but from all pictures I can find, lots of models look identical...
I'm hoping that this may be enough info for the problem to be identified as I'm guessing most of this range will have the same arrangement of inlets/outlets.
The customer has already called out the installers of the boiler, who have said the boiler is fine but there are two mains water feeds going to the unit causing an imbalance of pressures.
The taps in the bathroom/kitchen are fine, but when a higher demand of heated water is needed (shower/bath) the higher temperature cannot be achieved/maintained and the boiler can be heard turning itself on and off which would explain the water fluctuating between hot and cold.
Any help would be appreciated, especially if someone has a pipe work connection diagram!
Thanks in advance