Worcester Bosch 8000 Life 35 to replace High Flow 400 | Central Heating Forum | Plumbers Forums
Guest viewing is limited

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Worcester Bosch 8000 Life 35 to replace High Flow 400 in the Central Heating Forum area at Plumbers Forums

Messages
1
Hi.. Advice please regarding a new Worcester Bosch 8000 Life 35 for a 4 bed detached with ensuite and currently powerful shower which is great. We currently have an old High Flow 400 . I understand heat output will be the same on a 40 / 45 / 50 model but will the 35 be sufficient especially regarding water flow rate to the shower? Thanks
 
Your highflow has a built in store for HW.
The store will give more even temp even when demand changes during use.
No normal combi will be the same but some attempt to compensate with higher HW output (more KW).
So altho a larger output combi can deal with the flow rates of multiple bathrooms they are still doing it on demand and temps may fluctuate more than with a store.
I would look at a viessmann 111-w If you don't want a separate unvented cylinder.
(Unvented cylinder and system boiler should always be 1st choice for larger properties imo)
 
Do WB do a wall mounted stoarge combi?

OP...there is cost implication but I'd try and replace for like for like especially as you seem very happy with the performance. I have no experience with the WB 8000 L35 but the flow rate appears to be around 13L/m compared to the current WB 440 Highflows of 20L/m. I didn't look hard enough to see at what temperatures.
 

Similar plumbing topics

S
Morning all, I have a Worcester Bosch 8000...
Replies
0
Views
684
Simon from Watford
S
  • Question
Find the leak before you do anything major...
Replies
8
Views
2K
I am writing from Italy where storage combis...
Replies
8
Views
5K
I have connected the secondary pump to a wifi...
Replies
9
Views
2K
H
Hi there, thanks for your time to look at this...
Replies
0
Views
909
HRP123
H
Back
Top