Worcester Bosch Pressure releif valve snapped off

[ExArmy]

I appear to have snapped this off, though it turned like a tap, but as it snapped off in my hand and i looked at it I realised it's not supposed to turn like a tap.

How big a job is it to put a new one in? can it be done without taking the boiler off the wall?

this is the part here i think, it looks like it anyway from the picture. the boiler is a greenstar junior 28i Combi
I can't post a link as i'm not allowed but heres the part number

[h=1]Worcester Bosch 87161064310 pressure relief valve[/h]Product Code: 489924

 

[Dotty]

That's unlucky. You need to get someone in to replace that. Not a DIY job.


We cannot and will not give advice on the installation or repair of boilers, cookers or ANY gas appliances for your own safety.

Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. [DLMURL="http://www.ukplumbersforums.co.uk/im-looking-plumber-gas-engineer/"]I'm looking for a Plumber or Gas Engineer[/DLMURL]

If you are gsr please increase your post count to 10+ then send a PM (Private Message) with your gsr details to either Gas man - View Profile: gas man - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK or Redsaw - View Profile: REDSAW - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK who will check you and then give you access to the gsr private forum.

Providing gas-related advice to anybody who should not be touching gas and cannot prove their competence is unacceptable. We will take whatever action we deem appropriate to prevent such advice being given


Thank you.

UKPF TA's, Mods and Admin teams.

[DLMURL="http://www.co-gassafety.co.uk/deaths.html"]CO Gas Safety[/DLMURL]

http://www.ukplumbersforums.co.uk/central-heating-forum/42241-notice-gas-safety-related-advice.html