Worcester cdi classic

[mutley racers]

Hi all. Hope you had a good week.

I got the above boiler which keeps going to lock on only in hot water. Occasionally it lights when the heating is on and you turn it on. Got some new probes for it but anything else you think it could be.

Cheers

 

[Scott_D]

Sticky flaps
Can't remember the exact part name

 

[Harvest Fields]

Sticky flaps
Can't remember the exact part name

Don’t you just hate it when that happens?

 

[ShaunCorbs]

Sticky flaps
Can't remember the exact part name

Bearning plate ?

 

[Scott_D]

Bearning plate ?

That's it

 

[mutley racers]

So looking this up it seems you can just use a pencil and this fixes it?

Not gas related but I am in need of some Mcalpine T29-LN's anyone know who stocks them as I cannot really wait for delivery.

Cheers

 

[ShaunCorbs]

city should have them or bss

 

[mutley racers]

city should have them or bss

Looked at city and they don't unfortunately. Bss, thought they were only for the big boys with millions. Never had any luck with them before.

 

[mutley racers]

So It doesn't look like I will get those T29's by tomorrow. Can anyone recommend an alternative to connect to a 1 1/2 waste that does not need a trap.

It is for connecting to waterless urinals. Cheers

 

[ShaunCorbs]

Sorry nope

 

[mutley racers]

Sorry nope

Thanks for the quicj reply Shaun.

 

[Scott_D]

Got room for a hepvo trap?

 

[mutley racers]

Got room for a hepvo trap?

That's what's installed in the waste already

 

[Scott_D]

That's what's installed in the waste already

They sell their own adapter to compression

 

[ShaunCorbs]

They sell their own adapter to compression

arnt the inlets only 11/4?

 

[Scott_D]

arnt the inlets only 11/4?

I'm sure they do an 1-1/4 & 1-1/2 hepvo
You can get bent or straight adapters.
In fact I have one on my bath tub

 

[ShaunCorbs]

I'm sure they do an 1-1/4 & 1-1/2 hepvo
You can get bent or straight adapters.
In fact I have one on my bath tub

yea arnt the adapters 11/4 to 40mm tho? havent use one in ages so might be miss remembering

 

[mutley racers]

arnt the inlets only 11/4?

You would have thought so, but for some reason this perticular model is 1 1/2. I tracked down a supplier of the T29-LN and got them delivered special delivery. Also ordered some of the 1 1/4. All arrived today but no T29-LN. grrr.

I have so many jobs that are just not getting finished for some reason or another and it is literally making me want to go pop

 

[mutley racers]

I'm sure they do an 1-1/4 & 1-1/2 hepvo
You can get bent or straight adapters.
In fact I have one on my bath tub

Do they sell adaptors only though? Quite expensive paying for the whole lot for the adaptor.

Think I saw another make of these for £13 some where.

 

[Harvest Fields]

You would have thought so, but for some reason this perticular model is 1 1/2. I tracked down a supplier of the T29-LN and got them delivered special delivery. Also ordered some of the 1 1/4. All arrived today but no T29-LN. grrr.

I have so many jobs that are just not getting finished for some reason or another and it is literally making me want to go pop

Happens to us all mate. Keep your chin up

 

[Scott_D]

These?These? https://www.wickes.co.uk/Osma-HepVO-CV3-Waterless-Waste-Running-Adaptor-White---40mm/p/149143?CAWELAID=120135120001239167&CAGPSPN=pla&CAAGID=52608957744&CATCI=aud-305024815433la-297345969071&gclid=EAIaIQobChMIvNDnmZqv3gIVCs53Ch24WQA1EAQYASABEgJMKPD_BwE&gclsrc=aw.ds

 

[mutley racers]

So here is the answer.

Black dust: pipework and gas valve full.

New carcass and good to go. Thanks all for help

 

[ShaunCorbs]

Gas pressure must of been non existent?

 

[mutley racers]

It was actually fine the 1st time I was there but only there for quick due to it being an evening. Then when I went back I had it on for longer and it shot right down to 4mb!! Where does this stuff come from as I did some work on this a month ago and pressure was fine

 

[ShaunCorbs]

It was actually fine the 1st time I was there but only there for quick due to it being an evening. Then when I went back I had it on for longer and it shot right down to 4mb!! Where does this stuff come from as I did some work on this a month ago and pressure was fine

In short it's the gas dust aka Hydrogen sulphide

It's recommend to fit a filter before the boiler if it's that bad / had problems before