Worcester Compact - CDi or Si version? | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Worcester Compact - CDi or Si version? in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
23
Looking for a really, really compact combi for a small 2 bed, 1 bathroom flat with very restricted kitchen space. Smallest decent one I can see is the Worcester Greenstar. By all means recommend alternatives, but 690x390x280 looks hard to better.

I can't find any comparisons between the Si and Cdi types. All same size. Reliability and build quality would be a clincher.

Which would you prefer and why?
 
They are small but look horrible to work on, there are quite a lot of boilers designed to fit in kitchen cupboards.
 
Feel free to recommend better alternatives. For instance, I'm seriously thinking of Intergas - looks simpler and well made.

The problem is that the outside wall in the kitchen is almost all window - there's a small wall to the right of it where the combi would go. I also have to figure out where to put the hob in relation to the window and the combi. And whether to use a ceramic/induction hob rather than gas if that helps.
 
You said that back in 2013.

lol

You have a good memory! But what's your point? I've put off the installation because a) it's not immediately urgent though it needs to be done and b) the layout is a nightmare, and there aren't any good choices, only compromises and c) I need permissions from the building's management for the different choices, and this has been a holdup. First choice locations were not approved because of location of flue exit.

So hoping to do the installation soon.
 
You have a good memory! But what's your point? I've put off the installation because a) it's not immediately urgent though it needs to be done and b) the layout is a nightmare, and there aren't any good choices, only compromises and c) I need permissions from the building's management for the different choices, and this has been a holdup. First choice locations were not approved because of location of flue exit.

So hoping to do the installation soon.

Ah, I see the problem causing the delay now. Just seemed like 3yrs was a long time to decide on which boiler that's all.
 
You've already found your boiler... The Worcester companct cdi...

Fit & forget ;)
 
Status
Not open for further replies.

Similar plumbing topics

Need to get someone out to calc what your...
Replies
8
Views
2K
  • Locked
I was liking the Baxi 630 until I looked more...
2 3
Replies
59
Views
8K
I also thought it was 10:1, for the 4000 and...
Replies
28
Views
3K
Worcester Bosch - Vaillant - Baxi - Potterton
Replies
11
Views
5K
Back
Top