Worcester Geeenstar 28i Junior CH not working | Gaining Plumbing Experience | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Worcester Geeenstar 28i Junior CH not working in the Gaining Plumbing Experience area at Plumbers Forums

U

Unregistered

Hi guys, I hope you can point me in the right direction here. I had the above system installed in 2006, and have never had an issue with it until now.
When the heating is switched on, everything appears to run up ok (fan, pump, etc) and I get the flame light appearing, but after about 30 seconds the light goes out. There are no flashing lights to warn of anything untoward. I have pressed the reset button, but it makes no difference. Fan an pump are both working.
Hot water system works normally.

Can anyone advise please?
 
You need to register as a member to receive help but unless you are gsr I doubt the guys can help you, where in the country are you, there maybe a gsr guy here local to you.
 

Similar plumbing topics

Have you checked L-N ? 240 ?
Replies
1
Views
2K
If you have the right temperature rise for the...
Replies
10
Views
3K
W
pcb issue so gas safe engy required sorry to say
Replies
1
Views
701
76 Views and not one single "expert" has...
Replies
5
Views
577
If your fitter repressurised the E.vessel then...
Replies
9
Views
2K
Back
Top