worcester greenstar 24i junior green light flashing. | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss worcester greenstar 24i junior green light flashing. in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
B

bill29

hi every one and merry Christmas to you all.<br><br>i wonder if you can help. i have just bought a new home fitted with a Worcester 24i junior condensing boiler , &nbsp;i used it yesterday and it worked ok on hot water and CH. however when i tried to use CH and hot water today no joy so i checked the water pressure gauge and it was in the red so i filed the system up to 1.5 bar.and tried to reset the boiler but no go the green warning light just keeps flashing slowly, after i reset, no ignition, the fan and pump run but &nbsp;it just trips out, i have tried running HW and CH on there own still trips out won't reset, was wondering if it could be the diver-ta valve?<br>moving in on Monday so any help would be appreciated thanks in advance. BM
 
If its new, get worcester out, i think you have till 7 to get hold of them.

they will carry the spares to do the boiler.

but get hold of them now if you want a chance to get them before xmas!
 
not new just asking. to make sure i have tried all the obvious things a layman can do
 
Don't know if this has been resolved. I had a similar problem on a worcester, diverter valve was sticking, cleared blockage and was then working fine. Providing you have gas on and boiler fires up and actually runs. You will be better off getting someone in who knows what they are doing though.
 
thanks for that prob is it dose not fire up probably needs good clean out will get some one in. as boiler is in loft and i have asbestos's short of breath and all that, been in the plumbing and electrical industry all my life (65) now. but appreciate the advice. thanks again and have a good Christmas and all the best for new year BM
 
Worcester man man called today and fitted new fan, it would have cost £200 just for fan, but i took out years cover @ £25 per month = £300 per year, which included current repair, also if i take out policy next year i get boiler serviced which normally costs £50, so good deal all round i think.
 
yes thanks for your help and advice all the best for new year, cheers BM
 
Status
Not open for further replies.

Similar plumbing topics

Maybe it's one to pass off to worcester 🤷‍♂️
Replies
5
Views
806
W
pcb issue so gas safe engy required sorry to say
Replies
1
Views
700
Not offended. I understand your frustration...
Replies
7
Views
5K
Try the old turning off and on again via the...
Replies
3
Views
2K
Back
Top