Worcester HE Combi fault code

[Robert Tyrrell]

Went to this boiler today to replace the ignition transformer that mysteriously 'Popped' on Saturday.
Got it all back together and it started flashing a b1 code.
Didn't know what that was so I called Worcester tech line and they told me to push the little sim card in.
Did this and everything was fine but the customer has just called to say that the same thing is happening again.
Any ideas?
Im' going to have to go back tomorrow I think as I'm off to kendo now

 

[Robert Tyrrell]

Ill reply to my own thread then, ya miserable lot

It turns out that the heating had gone off due to a power cut, and the system was actually alright - with no faults at all, in the end.
My customer hadn't seen the reset symbol before so got confused, although I'm not certain by the b1 code was still flashing but I suppose it dens't really matter now as he's happy, and warm.

No response required to this now

 

[newcastle phill]

Well I was just about to reply - but wont bother

 

[Robert Tyrrell]

It's started up with the b1 again now o the PCB is getting changed now

 

[Dotty]

I reckon there's been a power cut.........