Worcs 24i RSF new pressure vessel...

[Pssst]

Need to fit an external pressure vessel as on board one has leaky diaphragm. Forgot to check what the connection is to the return and wondering if i should disconnect the old feed pipe and blank it. If so,does anyone know what size fitting? Ta

 

[lame plumber]

if the shraeder valve is fine why bother

 

[Pssst]

Indeed,,its either leave it on or cap it off..I'm leaning toward leaving it in but just wanted to be tidy.

 

[Pssst]

Do aftermarket exp vessels (eg screwfix) typically have a 3/4 mbsp thread suitable for a 3/4" flex tap connector/iso valve assy?
ta

 

[dancinplumba]

Do aftermarket exp vessels (eg screwfix) typically have a 3/4 mbsp thread suitable for a 3/4" flex tap connector/iso valve assy?
ta

yes but dont use 3/4 flexi tap connector do it rigid

 

[Pssst]

OK..just need to sort out a diy stand for the PV as the supplied brackets are usually naff and im stuck for space so it will have to sit on floor in boiler cupboard.

 

[gassafe]

mg_smile:Get a meter long flexi & then the custard can lift it off the floor to Hoover below it!

 

[lame plumber]

more hassle making a stand than popping 4 screws in a wall and tightening a big jubilee clip

 

[Pssst]

I'm thinking a circular cross section of something...maybe drain pipe or PE pipe..