Zone valve and gas bills | Gas Engineers Forum | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Zone valve and gas bills in the Gas Engineers Forum area at Plumbers Forums

Messages
22
Hi all

I have been noticing that my gas bills have been excessively high even in the current climate …I did a little investigating and found my unvented heating system only has one 2 port zone valve controlling the hot water.

My question is could this be what is causing the high bills as there is no way of controlling the heating ?
 
We'll need a bit more information about your system.

What have you got at the moment as far as thermostat(s) and thermostatic radiator valves? Is it a flat/house? What make/model of boiler do you have.
 
Seems unusual to only have 1 2 port valve, are you sure that’s all?
Agreed, I'd expect it to be a diverter valve, with two outlets rather than a simple zone valve, e.g. Y-plan.

Speculating a bit until we have more info and perhaps a couple of photos, if there really is only a single zone-valve on the whole system I'd expect that to control the radiator zone, with the hot water tank on whenever the boiler is. Perhaps it was once been a solid fuel system that's been converted on the cheap?
 
Speculating a bit more, but I think on unvented they have to have a spring return 2 port valve for safety on the hot water?
Correct this is one of the safety devices fitted to prevent overheating of the cylinder, it's not uncommon to see 2 - 2 port valves fitted and wired in series for time and temperature control on the primary circuit, this is not always the case and then one or even two others on heating zones 😉👍kop
 

Similar plumbing topics

You could try greasing the spindle of the gas...
Replies
1
Views
536
I have connected the secondary pump to a wifi...
Replies
9
Views
2K
H
Hi there, thanks for your time to look at this...
Replies
0
Views
857
HRP123
H
Thermostat changed... With the new one, it...
2
Replies
38
Views
1K
  • Locked
Still being called spammy by the forum filters...
Replies
8
Views
1K
Back
Top