Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the Showers and Wetrooms Advice - Whether a tiled sealed shower using a tray former and tanking, to create a wet-room. Or even just plumbing in an electric shower or shower using jets or mixer taps. Ask a plumbing question in here..
Normal Threads
Hi all. Has anybody ever experienced the middle leg of a shower base that stands on legs (such...
We currently have an electric shower fed with mains cold this mains cold is really bad pressure...
We have an Aqualisa Quartz shower that was installed three years ago. Recently, the pressure...
Hello,
I’m having a bit of an issue trying to fit a mixer shower bar, the pipe centres are...
Hi guys, new to this forum, was looking for advice regarding a mira flight shower tray i've just...
I have a Bristan mixer shower. It started leaking from the temperature control. A local plumber...
- BrianCox
- 1
- 884
- Latest:
- SimonG
Hi All
New here and have a bit of a weird one for you!
Installed a concealed shower valve on...
- josh-b
- 5
- 1K
- Latest:
- king of pipes
Tray is stone cast resin low profile, 1200 by 900. Suspended floor is receiving all new 18mm P5...
- Phil0185
- 3
- 2K
- Latest:
- ShaunCorbs
Hello, I’ve just bought a house in London and have noticed a water mark form on the ceiling of...
I have installed a new shower valve and shower head (the restrictor um fell out) and as a result...
Can anyone explain this? I had a shower professionally istalled in my en-suite a few weeks ago...
Could someone give me a heads-up as to the cost of a plumber to replace a thermostatic cartridge...
- BrianCox
- 3
- 2K
- Latest:
- SimonG
I have recently fitted a thermostatic external mixer shower in my bathroom. The problem is that...
- showerguy
- 5
- 2K
- Latest:
- John.g
I have recently fitted a thermostatic external mixer shower in my bathroom. The problem is that...
- marvin
- 2
- 1K
- Latest:
- Chuck
Hi, my square drain had dropped slightly in one corner and needs to be raised and replaced. Am l...
Hi all, DIY rookie and have an issue with malfunctioning diverter valve - water currently flows...
Hello everyone. Please could you give me any advice? I am a student in a building with other...
- microdell
- 4
- 1K
- Latest:
- king of pipes
My local rugby club are having intermittent pressure drop problems with their showers. I’ve done...
I installed a Bristan mixer bar shower about two and-a-half-years ago. I have recently noticed...
The tub/shower valve was so tight and hard to turn that I could almost not turn it, so I just...
If I dropped an Allen key down a drain, do I have to get it out? What happens if I don't will...
Hi. I have have purchased 3 Mermaid wall panels to replace the tiles in our shower. These panels...
As a plumber what qualification is needed to install a replacement electrical shower in a...
Hi there,
I'll soon be installing a SONAS 1500 X 800 resin shower tray in a bathroom that I am...
- dave100
- 2
- 3K
- Latest:
- king of pipes
Hi. Should these shower knobs be facing down instead of up. They seem to foul one another if...
- miketurner201
- 2
- 771
- Latest:
- miketurner201
Hi
Can anyone please give advice on our Grohe Smart shower. It initially starts off hot for 30...
Just removed this shower tray.
What type of shower tray is this?
Why aren't all shower trays...
- jrtrrror
- 7
- 1K
- Latest:
- king of pipes
Hi
How far from the front edge of the shower tray do you guys position the shower door?
Ta
Hi guys
Just looking for advice on how to make the installation of a 1200x800 stone resin tray...
- jrtrrror
- 1
- 1K
- Latest:
- gmartine
Hi.
We want to replace our shower tray. I've been doing lots of research trying to establish...
New Threads
-
UK UFH specialist in Norwich areahello, I have a friend who has a FAR ufh setup...
- Started by Jim Goodenough
- Replies: 0
-
Determining the last radiator in the downstairs radiator runI am attempting to find out which one is the...
- Started by elmocambo
- Replies: 3
-
WAVIN (Hep20) UFH Actuator - is newer model compatible?Hi. Mil's UFH has Wavin 230V 2W actuators -...
- Started by DevsAd
- Replies: 0
-
New combi choice - manufacturer with the 'best' controls?Hi all. Asking for a friend who is getting a...
- Started by DevsAd
- Replies: 5
-
Are Pipe Heaters Safe?I have an ouside garden tap that freezes every...
- Started by Traveller 47
- Replies: 1
-
Choice of pipe for hot water secondary/recirculating systemWhat plastic based / barrier pipe can you use...
- Started by Failte
- Replies: 7
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2