Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the Showers and Wetrooms Advice - Whether a tiled sealed shower using a tray former and tanking, to create a wet-room. Or even just plumbing in an electric shower or shower using jets or mixer taps. Ask a plumbing question in here..
Normal Threads
Hi,
I've fitted a bath shower mixer with the chrome elbows connected to the water supply leaving...
My shower has developed a fault in that it will not pass any hot water.
Ihave performed the...
- onceceltic
- 3
- 802
- Latest:
- Paulus
I'm installing a shower tray onto an 18mm plywood base which is also fixed to an 18mm Weyroc...
- Monkey Wrench
- 8
- 5K
- Latest:
- Monkey Wrench
Hi, We have a Fortic 115 litre HW + 40 Litre cold combined cylinder/tank which is mounted on the...
I am not a plumber, just after some advice really. Had a new extenstion about 3 years ago and...
Hi,
I have the above model shower screen and the small wheel at the top has broken. I have had a...
went to look at said shower and the handle has come off ,i dont know much about these and had to...
Hi
Above 10 year old shower mixer has died leaving a double problem. It required pipework at...
Hi everyone, bit of a long shot here. I have got a customer who wants a theramstatic mixer...
Hi chaps, I am wanting to know the names of the washers you get with some traps. Like shower...
- mutley racers
- 2
- 2K
- Latest:
- Deleted member 25704
I need to replace a part on this shower anyone know what it is?
Hi All. First post on here so I hope I've got this right. My query relates to installing a...
I'm a spark and i'm putting a new electric shower in my bathroom, pipes n all. I was just...
Hi Guys,
has anybody installed a trevi boost concealed shower? Hot tank fed and cold mains...
Hi, Replaced a worn out trition 300ti shower for a trition belize shower 6 weeks ago and after 3...
Hi, looking for a bit of advice....
we had our bathroom done a few months ago, part of which...
I have installed several shower valves and shower bars in the past but now require to replace an...
- The Bedwetter
- 5
- 2K
- Latest:
- The Bedwetter
hi guys new to this forum & i'm after a bit of help, ive installed bathroom suits before and i'm...
Hi
i have a dripping cold tap. The bath unit I have has a "switch" (see pic ) to turn water...
I have a thermostatic shower (6 years old) that is running hot and cold. My plumber wants to...
I fitted a Bar mixer shower for a woman about 4 months ago when i did her complete bathroom
she...
Hi,
I hope this lot makes sense, A customer of mine has two bathrooms next to each other. I...
I need 2off BES 10608 thermostatic shower valves.
Original manufacturer was SOL. Italian I...
Hi
I currently have an aqualisa quartz digital pumped shower installed on a gravity fed system...
Got to fit a shower pump Wednesday night for a customer, the shower and pump will be located the...
- PlumbersMate
- 8
- 112
- Latest:
- PlumbersMate
about 5 months ago i fitted a bar mixer shower for a customer and it ran great
yesterday i got a...
Good morning, I have been asked by a customer to increase the power/ flow of his shower.
The...
Hi all,
You know those taps with the shower head and hose attached that has the knob you pull...
Just read installation manual for an electric shower and it says "minimum static pressure 0.5...
Can anyone recommend a good shower pump manufacturer as we have used s/turner for years but we...
New Threads
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0
-
An Boiler be left on with water tuned off?I have a Worcester Greenstar boiler and would...
- Started by Traveller 47
- Replies: 9
-