Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the Showers and Wetrooms Advice - Whether a tiled sealed shower using a tray former and tanking, to create a wet-room. Or even just plumbing in an electric shower or shower using jets or mixer taps. Ask a plumbing question in here..
Normal Threads
how do you go about consealing the pipework into the walls and fitting a thermostatic consealed...
Hi , need advice. Recently purchased a Hudson Reed Kubix Triple Therom Shower Valve which runs...
Fitted one of these the other day the one with the 4inch waste hole in it. The waste hole itself...
Hi
About two years ago, my wife and I had our bathroom refitted by local tradesmen (a couple...
Good afternoon, I am looking to fit a shower and WC into a room which currently has no water...
I will be using solvent weld pipe with my trap, but is there any difference between using...
I have just drilled for my shower waste to go through the wall.
Now i need to set in place...
I have a mixer shower well 2 and they were ok till they were taken apart to sort a drip out now...
hello, hope you can help.
pricing up a bathroom with a shower pump in an 800 quadrant shower...
As new emergency shower kit - header tank with pull-down drench handle. Was in a swimming pool...
i have a nabis 1.6 bar t-end mk 2 shower pump. When i go to use the shower the pump won't start...
Hello all, I've just registered and I am looking for some help with my shower pump.
I have...
I have just had a new boiler, Vaillant, fitted and a shower which runs from the boiler (Bristan)...
- SallyP
- 7
- 2K
- Latest:
- Plumbstar Tom
I have an old shower mixer that has worked just fine for ages. Now the grommets inside the body...
evening all,
Went to see a customer today and he has a shower issue. it is a seperate...
Hi.
First off I'm not a plumber, this is a diy project so go easy:o
I'm fitting a new...
Hi there,
I have bought this shower from the internet
I have been told by a plumber that...
- jacknibbles
- 2
- 2K
- Latest:
- Plumbstar Tom
hi.. i was wondering if anyone could help me..i live in a block of flats where the hot water is...
Hello forumites!
Hopefully you can help solve a mystery that 2 plumbers have not been able...
hello guys my first post so here goes :)
im due to fit a Briston Duraspeed 70 shower pump...
hi all i have a mira 723 mixer shower, its gravity fed from hot water cylinder. the cold is fed...
Hi
We bought a town house just 6 months back and till now we had no problem. The house is a new...
I've removed my Mothers mira sport 8.5 and trying to fit a creda aquawave 7.5
The assistant in...
- johnbhoy
- 8
- 2K
- Latest:
- GQuigley67
hi
a customer has a poor performing mixer shower and wants to upgrade. i've told him there is...
- kay-jay
- 1
- 758
- Latest:
- Plumbstar Tom
We are planning on having a retractable shower head that is mounted on the side of the bath. But...
I have a problem with the pressure of the cold tap on my bath.
Here is the situation...
- booglehoop
- 10
- 2K
- Latest:
- stevetheplumber
Electric shower (power shower? - no external pump, hot and cold feed go into it, both in 15mm)...
Hello All
signed up to get some advice and which make of shower cubicle to buy
looking for...
Hi
Does anyone recognise this shower valve. Any idea of a model or manufacturer would be...
went to price a job. the existing shower and 4 body was a working off a pressurised system.
the...
New Threads
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0
-
An Boiler be left on with water tuned off?I have a Worcester Greenstar boiler and would...
- Started by Traveller 47
- Replies: 9
-
-
Boss your bathroom - Join the Tile High ClubTrade Account Victorian Plumbing 10% off for...- Started by Dan
- Replies: 0