Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the Air Sourced Heat Pumps - Air Sourced Heat Pumps.
Normal Threads
- Locked
Just finished a job for family this week (never working for family again!) and wondered what...
-
- Locked
why do we tell OP's to do this ? fair enough if they carnt afford anything else, but otherwise...
- dancinplumba
- 11
- 206
- Latest:
- dancinplumba
- Locked
can anyone help. i am in the process of buying a house built in aprox 1978 with hot air heating...
- Locked
Remove ideal istor
Fit 180l unvented cyl
Fit ideal logic + system boiler
Fit s plan
2400?
Would...
- Locked
hi can any one know how to stop a open vented hot water cylinder from air locking.The owner has...
-
- Locked
Is it just me but could we all do with knocking down prices.
For instance, 20p off fuel, would...
- Locked
Hi,
Have a very leaky immersion heater on a hot water tank ( economy 7 set up with two...
- Locked
Hi, looking for a bit of advice i have a mini c24 that’s leaking from the auto air vent, was...
- Locked
I know this has been asked before but in different curcumstances
This is a sealed system...
- Locked
Dear all,
In short I am diagnosing terrible trapped air noises in my CH system.
I've...
- Locked
Hi, I am looking for some advice.
i have a linea 24 boiler and today it has decided to only heat...
- Locked
Hi, i have a problem, i have one cold radiator downstairs in the kitchen and one cold rad...
- Locked
OK, this Technical Bulletin is from USA but it’s an interesting read. Check it out here...
- Locked
i seen this on ebay, IDEAL CLASSIC FAN REPAIR KIT fits 95% plus others GLOWO | eBay...
- johnnyplumb
- 15
- 234
- Latest:
- arran197
- Locked
Apologies for asking in the gas forum (I'm an oil enineer) but you gas guys know your analysers...
- Locked
Hi Hope that someone can advise on this problem. Went to a new build house, 7 months, owners...
- Locked
Hi All, I'm a sparky and have dropped in from the "other" side to ask what may appear to be a...
- Locked
got a clogged up air vent that needs changing but boiler will not drain due to this. Whats the...
- Locked
Recently bought a house which may well have a central heating system cobbled together from two...
- Locked
I see in lots of books and manuals that you shouldn't blow into air pressure switches as yoyo...
- Locked
I have a hairline crack in the corner of my shower tray. Is there a spray on, or paint on liquid...
- darrenangel
- 8
- 4K
- Latest:
- Irish
- Locked
I have had to remove the pump from my central heating/hot water system as I suspect a fault as...
- F Giles
- 11
- 7K
- Latest:
- Best
- Locked
There is a big building with about 30 rads. Its the top floor TRVs that are playing up and...
- emergencyman
- 10
- 169
- Latest:
- Leo21
- Locked
hi all ,
anybody know how to repair a hole in a hw cylinder, had one today with a half inch...
- Locked
Hi,
I'm new here and I would be grateful for some advice if you can spare the time.
I have a Y...
- Locked
Hi, I have just acquired a new air source heat pump to replace the old one which died a couple...
- Locked
Had some real bad ones recently :( I don't usually have much a problem with the diagnosing, I'm...
- Locked
Hi, My Vaillant Turbomax 837E was leaking and I traced it to the Auto Air Vent which seems to be...
- Locked
is the part no 642482 and cheapest place to buy.thanks sam
New Threads
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0
-
An Boiler be left on with water tuned off?I have a Worcester Greenstar boiler and would...
- Started by Traveller 47
- Replies: 9
-
-
Boss your bathroom - Join the Tile High ClubTrade Account Victorian Plumbing 10% off for...- Started by Dan
- Replies: 0