Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the Bathroom Advice - Ask questions and ask for advice on Bathrooms, Showers and Wetrooms in this forum category. Find advice here..
Normal Threads
- Redirect
Hi
We recently moved into a property that is about 3yrs old.
Ever since we have used the...
- CCANON
- –
- –
- N/A
N/A
Hi everyone, I managed to snap a tee and an elbow whilst cleaning the pipework connecting the...
- DavidTaylor
- 2
- 839
- Latest:
- DavidTaylor
Hi,
i made the daft decision to fit my own new bathroom - like for like replacement of suite...
Scott Jenkins Water Softeners Ltd is a fast growing family run business that covers all aspects...
- ScottJenkins
- 0
- 917
- Latest:
- ScottJenkins
Hello all
I'm replacing 2 unvented cylinder a which are (a) end of life and (b) installed in a...
- Philip Saunders
- 0
- 848
- Latest:
- Philip Saunders
Hi, not sure of model but it seems to be the 3 square type taps/valves like cross water controls...
Hi,
I live in flat on first floor. Ground floor ceiling has a leak. My plumber has resealed...
- Know nothing
- 0
- 551
- Latest:
- Know nothing
Hi all,
Can anyone identify this flush valve?
Thanks everyone
Jennie
I have a thermostatic concealed shower and would like to remove the thermostatic valve and look...
- miketurner201
- 0
- 676
- Latest:
- miketurner201
Hi all,
My customer is choosing a reinforced bath. They're looking at Carronite and Beauforte/...
- Jennie
- 2
- 3K
- Latest:
- William Norman
Hi all and thankyou in advance for any advice you can give.
There is a three cubicle run of...
Hi, Need a bit of advice on getting to the inlet filters on a Mira Excel i think 2010 version...
- mikerog25
- 2
- 827
- Latest:
- Ben-gee
When fitting waterproof XPS (Elements) boards in a shower recess, should they be cut tight to...
- smallsteve
- 1
- 800
- Latest:
- ShaunCorbs
Can i ask you experts, if i buy 2 traditional taps for my basin, what else do i need
Do i need...
- mylifestory
- 1
- 580
- Latest:
- ShaunCorbs
Dear All,
I'm very excited to be converting a small bedroom into an upstairs bathroom in our...
- cailadd
- 14
- 2K
- Latest:
- oz-plumber
Can anyone help with this please?
I have had a bedroom and en suite installed in what was loft...
- 5696jamie
- 1
- 702
- Latest:
- ShaunCorbs
If anyone can answer this query: I have fitted a smart switch to my Aqualisa Visage Processor...
- Christ22
- 1
- 1K
- Latest:
- Ben-gee
Help..... So we have an internal filled SiamP toilet push panel flush toilet system. My Son has...
I am doing a 3 garage conversion into a annexe. I am doing it all in push fit plastic. I don't...
Hi All,
I have this silly question. Water pressure for hot water is a bit low while cold water...
Hi All,
These push fit type pipes are in the bathroom, they twist but I was not able to...
- JohnMalcolm
- 1
- 895
- Latest:
- ShaunCorbs
I wondered if anyone could help. We have just had some panels installed however there is quite a...
- Jonny100
- 12
- 1K
- Latest:
- Knappers
I am trying to get information for a customer about the pipe centre size for the old style mira...
- Bars18348
- 2
- 768
- Latest:
- king of pipes
Hi all,
We recently had a ground floor bathroom/wet room finished off, It's about 3.6m long by...
Hi we've just had a bathroom fitted with a mixer tap to the sink and mixer tap with a bath...
Hi all.
I need to improvise a flush pipe some how. Anyone managed to do this with waste pipe...
I think we have an indirect hot water cylinder, we are trying to replace a sink. However there...
- Wamus_202
- 1
- 855
- Latest:
- ShaunCorbs
Hi all
Wonder if anyone can help
Recently my hot water taps throughout the whole house lose...
My friend's bathroom is on a concrete slab. Near the shower there, for years, the wood has...
Hi. First time poster.
I've just had a new bathroom fitted in my loft and am having an issue...
- brazilianx
- 5
- 1K
- Latest:
- brazilianx
New Threads
-
Toilet blocks/pods advice wanted?Hi folks Do many of you do the type of work...
- Started by macka09
- Replies: 0
-
-
-
UK UFH specialist in Norwich areahello, I have a friend who has a FAR ufh setup...
- Started by Jim Goodenough
- Replies: 0
-
Determining the last radiator in the downstairs radiator runI am attempting to find out which one is the...
- Started by elmocambo
- Replies: 4
-
WAVIN (Hep20) UFH Actuator - is newer model compatible?Hi. Mil's UFH has Wavin 230V 2W actuators -...
- Started by DevsAd
- Replies: 0
-
New combi choice - manufacturer with the 'best' controls?Hi all. Asking for a friend who is getting a...
- Started by DevsAd
- Replies: 5
-
Are Pipe Heaters Safe?I have an ouside garden tap that freezes every...
- Started by Traveller 47
- Replies: 1
-
Choice of pipe for hot water secondary/recirculating systemWhat plastic based / barrier pipe can you use...
- Started by Failte
- Replies: 7
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 5
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 10
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3