Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the Plumbers Arms - For Professional Plumbers only, with 50+ posts..
Normal Threads
Made the mistake of agreeing to fit a 2nd hand cylinder for a family friend that is broke at the...
- Pickwickpick
- 3
- 50
- Latest:
- Pickwickpick
Any recommendations?
The usual screwfix, toolstation, willams and co are a bit naff and dont...
- Scott_D
- 7
- 74
- Latest:
- Ben-gee
Evening all,
I have a customer complaining about a macerator I fitted last year. It's fed by a...
- Jock Spanners
- 4
- 41
- Latest:
- Jock Spanners
Hi all, have taken the unvoluntary plunge and registered for the VAT on flat rate scheme. Now...
With easy-use isolation inside, drain off at end (not that they'd used it), customer told to...
- WaterTight
- 4
- 53
- Latest:
- WaterTight
What do you use?
A spray bottle with something in it?
Thanks
- WaterTight
- 11
- 103
- Latest:
- king of pipes
And if so I'm thinking sockets would need to be seriously deep or is there something out there...
Hi everyone,
I'm needing to trace a leak on copper main in screed at my son's house. Anglian...
What happened to the 'Hall of Shame'? Is it still around? Anyway this is one of the best I've...
I believe this used to be done to encourage circulation in an old system that wasn't pumped...
- WaterTight
- 9
- 93
- Latest:
- Pickwickpick
hi all,
A customer wants me to add (in series) an additional 200 ltr UVHWSC to the existing...
- Jim Goodenough
- 7
- 55
- Latest:
- Jim Goodenough
I’ll try and do what the heck I want Britain? With all the questions in relation to fixing...
- Aquarius
- 2
- 72
- Latest:
- king of pipes
What causes copper to turn silver and sort of a rainbow effect? Must be a reaction with...
- mfgs
- 1
- 37
- Latest:
- Pickwickpick
I have two elderly customers who are no longer able use the Drayton rt212 trv’s they have on...
- mfgs
- 5
- 63
- Latest:
- mfgs
Anyone else getting an obscene amount of adverts on here. Using my phone to browse is a real...
- mfgs
- 5
- 60
- Latest:
- Lou
Surveyed for a combi conversion and forgot to look at the make of Baxi boiler to be replaced...
Had this twice this month - What do you guys do in this situation?
Asked to service or gas...
- Scott_D
- 9
- 112
- Latest:
- oz-plumber
Anyone fitted these?
What do you think?
Easy to use or over complicated?
- Scott_D
- 2
- 44
- Latest:
- Scott_D
Evening All,
Today I encountered one of filthiest central heating systems I've ever seen. It...
- Jock Spanners
- 3
- 42
- Latest:
- Jock Spanners
Job I’m working at has had a new boiler I’m guessing vaillant or glow looking at the terminal...
- ShaunCorbs
- 6
- 69
- Latest:
- king of pipes
Got asked to up tools and leave a full bathroom install the other day by a fella who's now...
Asked to sort a dripping tap, I said £65 plus parts to fix or £85 plus tap to replace.
They...
- Scott_D
- 7
- 53
- Latest:
- ShaunCorbs
Hey all. Hope you are all well.
Has anyone done a boxing in with skirtings? If so, when doing...
- mutley racers
- 1
- 33
- Latest:
- ShaunCorbs
hey all. I hope you are all enjoying the weather and sweating buckets in lofts etc.
Went to a...
- mutley racers
- 3
- 60
- Latest:
- mutley racers
I used to be the "Expert Plumber" in a B&Q warehouse (don't laugh, had the badge and...
- Keefy
- 12
- 112
- Latest:
- Ric2013
Can anyone suggest a dehumidifier? I found and repaired a leak under a bedroom floor today. My...
- moonlight
- 1
- 35
- Latest:
- SimonG
None of this partnership was ever written in ink, just a gentlemans/friends/mutual understanding...
- Keefy
- 4
- 83
- Latest:
- Keefy
Evening all,
I've been asked to supply and install a Surestop valve on a dentists surgery, I've...
- Jim Goodenough
- 10
- 72
- Latest:
- Scott_D
I am in a bit of dire straits with my accounts ever since forming a ltd and getting an employee...
- Stanios
- 6
- 57
- Latest:
- Last Plumber
New Threads
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0
-
An Boiler be left on with water tuned off?I have a Worcester Greenstar boiler and would...
- Started by Traveller 47
- Replies: 9
-
-
Boss your bathroom - Join the Tile High ClubTrade Account Victorian Plumbing 10% off for...- Started by Dan
- Replies: 0
-
Mixer Tap Cartridge change advise.Hi Our kitchen mixer tap is leaking around...
- Started by Eejay
- Replies: 1