Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Questions and plumbing advice in the Plumbing Zone | All Other Country's - Find Plumbing Zone on Plumbers Talk. Professional plumbing advice forums. Plumbers Zoning and Zones..
Normal Threads
- Question
Can you let me know what temp deg c you and/or your customers find acceptable for domestic
hot...
- Question
Morning Guys
I have been asked to fit a water softener for by an elderly lady. She has a budget...
- Question
My tenant has asked for a water meter to be installed but the problem is my property is a flat...
- Question
can anyone point me in the right direction
brittany combi 80. central heating works fine...
- Question
Please bear with me I have a new born baby in the house and I want to get this sorted so I will...
- Question
Hi,
I have a Worcester-Bosch CDi 35 which is not heating the rads, hot water is fine. On closer...
-
- Question
http://archive.defra.gov.uk/environment/quality/water/industry/wsregs99/documents/waterregs99-gui...
- Question
what is the longest run alowed for hot water in vented system?
just wondering for two reasons...
- plumber89
- 6
- 6K
- Latest:
- Sid Viscous
- Question
Brittony water heater problem. Pilot stays light but when hot water opened up does not fire and...
- Question
Brittony water heater problem. Pilot light ok but when hot tap opened the pilot goes out. Can...
- Question
Hi all, following on from a recent question that i asked about hot water cylinders. I have to...
- Question
Working in a ground floor flat, all cold is mains fed and the system for hot i've never come...
- Question
Hi,
I am new to this forum and this is my first post.
I am looking for some advice regarding...
- Question
Recently moved into a house with a Minimax water softener fitted which takes 2 4kg blocks of...
- Question
hi all,
has any one on here got an exploded view diagram of all the parts that go into...
- 1967skyblue
- 1
- 3K
- Latest:
- stevetheplumber
- Question
Hi all I hope someone can help!
about 3 weeks ago I came home to find water leaking from the...
- Question
Hi any one help, fitted new indirect hot water cylinder, 900x450. Range cylinder.
new pipe work...
- Question
Done a job In a house where replaced 2 rads and was to sort out the problem with the Luke warm...
- Question
Hi all,
I have a dilema that I'd like some advice on please as I'm sitting on the fence over...
- butlerps
- 4
- 1K
- Latest:
- stevetheplumber
- Question
Hi,
We have the above boiler that has an intermitant H/W problem.
We have found from time to...
- Question
I have recently had a stove fitted with a back boiler.
the oil system I have does water and rads...
- Question
Evening everyone, i have just got myself a water softener and wanted your expert advice as to...
- Question
Hi, I have noticed when the incoming main valve is fully closed it is still passing water...
- Question
I have a range tribune unvented hot water cylinder with the "high flow rate inlet control set"...
- Question
Hi folks,
first time poster & great forum. Have a problem with my UFH and hope I can find some...
- pmt
- 20
- 5K
- Latest:
- peteheat
- Question
I have a glow worm compact 100E that shows the gas pressure exactly 2.
Sequence of events:
1) I...
- Question
i have a macdee arcadia inlet valve (i think) it flushes fine but when its finished flushing the...
- Question
my cousin has an indirect system and to get hot water the heating system has to be on as...
- Question
Can anyone help me, what on earth is a waste water lifter, and does anyone know anything about them
- robbo198787
- 1
- 3K
- Latest:
- SimonJohns
- Question
I have this situation where the building has 9x1000L storage reservoirs on the roof which are...
Plumbers Talk
New Threads
-
-
Bathroom Fitter in Newcastle Under Lyme RequiredBathroom Fitter in Newcastle Under Lyme...- Started by Dan
- Replies: 0
-
-
Biasi Riva Plus He 28C - No hot waterBoiler: Biasi Riva Plus He 28C Erp GC...
- Started by abc_plumb
- Replies: 0
-
Tape for pipe insulationDoes anyone have recommendations for tape to...- Started by siricosm
- Replies: 3
-
Higher than normal CO on new Grant InstallWondering if anyone can shed some light...
- Started by MethodPH
- Replies: 7
-
Radiator tails weepingHi all, I fitted my first rad the other day...
- Started by kristeva
- Replies: 3
-
What could be causing this noise in the tundish?Hi all, anyone know what could be causing...
- Started by Lawsofpower
- Replies: 5
-
Capped gas pipe begging ovenHi all. Hope you are well. So I fitted a new...
- Started by Steveuk
- Replies: 1
-
Replacing push fit Osma Gold for something else - tap changeHi, I know the fittings I have are Wavin Osma...
- Started by Gs2022
- Replies: 1
-
Ideal logic C35+ with Halo Lite RF ( not wi-fi)Trying to find an answer to my question...
- Started by trickytrev
- Replies: 0
-
UK Is that right to add inhibitor in boiler filter?I had an engineer today added inhibitor in the...
- Started by Jurgenjay
- Replies: 3
-
-
Is there a stand alone multiroom controller for wireless TRVs?Hi, can anyone recommend a controller for...
- Started by bureaucrazy
- Replies: 6
-
WANTED: Grasslin Famoso 601rf timer thermostatHello, the clock broke on my wireless...
- Started by bureaucrazy
- Replies: 3
-
-
-
What is causing water hammer in my flat?Hello I wonder can anyone shed any light on...
- Started by Mr Gwent
- Replies: 1
-
-
Issues With Nest Generation 3 Operating Boiler?I have a Google Nest Generation 3...
- Started by Dulbert
- Replies: 5
