Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Questions and plumbing advice in the Plumbing Zone | All Other Country's - Find Plumbing Zone on Plumbers Talk. Professional plumbing advice forums. Plumbers Zoning and Zones..
Normal Threads
- Question
Good morning,
When i turn on the hot water tap the spindle does not move to...
- Question
Hi,
Can anyone recommend a high flow water softener?
Cheers
Shane.
- Question
A friend has contacted me regarding his boiler. Being a plumber not a heating engineer im...
- Question
Hi,
Got home from work today to find that we have no hot water or heating.
The boiler is an...
- Question
Hi
How do I put a water supply into a room which I am converting into a utility room? The...
- Question
Hi all need some help please. As mentioned got hot water but no heating. The boiler fires up...
- Question
We have inherited an inline water heater that is used to provide hot water for two hair salon...
- Question
Hi
I'm hoping someone can help me. I am currently on a private supply and want to connect to...
- Question
Hi, my builder has rerouted my DHW pipework and we cannot get the air out. Interestingly the...
- Question
Can anybody help, I have just installed a new lawn irrigation system, but the pressure from the...
- Question
hi all,
i replaced a kitchen tap for a customer this morning, it was a like for like tap same...
- Question
hi there
im trying to cut off the water to the cold water supply in my bathroom, i can cut off...
- Question
hi , i know that we could not fit pumps to incoming water supplies--but i am led to believe that...
- Question
Bit of advice please. My problem is with low pressure or flow in my kitchen mixer tap. The...
- Question
Good evenings,
I had call from a neighbour of mine wanting to know is he could harness the...
- Question
I've just replaced a monoblock mixer tap in a kitchen and the new tap has lost about half of the...
- Question
I have a cellar that has a well type affair in the corner that sems to overflow every now and...
- Question
Hi all,can any one advise me please?
I have a back boiler with an indirect system.
There is no...
- Question
hi there,
in a nut shell, i have a customer that (like most of us) is complaining about the...
- Question
hello, is it possible to terminate a rain water down pipe into a soil stack?
cheers
- Question
i removed old bath taps and replaced them with ceramic disc one the flow has been reduced y is...
- Question
Hello,
I currently have an economy seven water heater that heats 115 Litres each night. We...
- Question
Hi could anyone tell me which is the better water softener,the regenerative salt type, or the...
- Question
Hello All,
I moved into a flat with an economy seven heating and water heaters. The water...
- Question
Hi
I have just fitted a bath shower mixer taps I have plenty of cold water pressure but the hot...
- Question
Hi folks, a quick question about moving a gravity fed cylinder from airing cupboard to the loft...
- Question
Hi all
Not actually name Ron but i am using my late uncles name as i did my apprentiship with...
- Question
Hi everyone i am new to the forum. i got a call today and the person has asked me to go and look...
- Question
HI !
Had to change a broken bath mixer today. No valves fitted so i drained loft tanks and hot...
- Question
How can you increase the Water Pressure ?
Plumbers Talk
New Threads
-
Is this bend in a PEX pipe too much?Hi, I by chance discovered that amongst a...
- Started by techweb
- Replies: 1
-
-
Bathroom Fitter in Newcastle Under Lyme RequiredBathroom Fitter in Newcastle Under Lyme...- Started by Dan
- Replies: 0
-
-
Biasi Riva Plus He 28C - No hot waterBoiler: Biasi Riva Plus He 28C Erp GC...
- Started by abc_plumb
- Replies: 0
-
Tape for pipe insulationDoes anyone have recommendations for tape to...- Started by siricosm
- Replies: 3
-
Higher than normal CO on new Grant InstallWondering if anyone can shed some light...
- Started by MethodPH
- Replies: 7
-
Radiator tails weepingHi all, I fitted my first rad the other day...
- Started by kristeva
- Replies: 3
-
What could be causing this noise in the tundish?Hi all, anyone know what could be causing...
- Started by Lawsofpower
- Replies: 5
-
Capped gas pipe begging ovenHi all. Hope you are well. So I fitted a new...
- Started by Steveuk
- Replies: 1
-
Replacing push fit Osma Gold for something else - tap changeHi, I know the fittings I have are Wavin Osma...
- Started by Gs2022
- Replies: 1
-
Ideal logic C35+ with Halo Lite RF ( not wi-fi)Trying to find an answer to my question...
- Started by trickytrev
- Replies: 0
-
UK Is that right to add inhibitor in boiler filter?I had an engineer today added inhibitor in the...
- Started by Jurgenjay
- Replies: 3
-
-
Is there a stand alone multiroom controller for wireless TRVs?Hi, can anyone recommend a controller for...
- Started by bureaucrazy
- Replies: 6
-
WANTED: Grasslin Famoso 601rf timer thermostatHello, the clock broke on my wireless...
- Started by bureaucrazy
- Replies: 3
-
-
-
What is causing water hammer in my flat?Hello I wonder can anyone shed any light on...
- Started by Mr Gwent
- Replies: 1
-
