Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the UK Plumbers Forums - This is the UK Plumbers Forums. Plumbing threads related to UK rules and regulations. Advice for Plumbers in the United Kingdom. Keep Gas-related advice in the Gas Engineers Forum..
Normal Threads
Hi. I had issues with cold spots four years ago and had a Magnacleanse done. This caused a few...
Any ideas which leadloc size I should need? I'm thinking 3/4 9lb but any guidance which I need...
Good afternoon,
Just looking for some general advise, I'm renovating my kitchen and need to...
Hi, I'm trying to replace a motorhome tap and have come across these push fittings which don't...
- Crooksy88
- 1
- 329
- Latest:
- ShaunCorbs
I removed three of these sections to clean and when I put them back together I noticed leaking...
quality product wanted, my 1/4 turn kitchen sink tap inserts need replacing and i am looking for...
Do most composite valves now for unvented cylinders have a tee on them For the expansion valve...
- Matt0029
- 2
- 535
- Latest:
- Ben-gee
i am a landlord and have had great advice here.
I am using a new gas engineer/plumber who tells...
This issue arose about a year ago. Does anyone have an idea why I occasionally hear (about once...
- Jackson710
- 0
- 731
- Latest:
- Jackson710
Looking for silicone recommendations for sealing between a metal bath and upvc wall panels. I...
Hi,
a couple simple questions.
1. I have two pipes like seen on a attached photo in my back...
We have a dual heating system, a solid fuel stove with back boiler and a external kerosene...
Hi All,
The temperature knob on my Hansgrohe Ecostat S shower mixer has been installed...
- Tailpond
- 2
- 464
- Latest:
- Tailpond
Hello everyone,
I'm facing a rather complex situation and I need your expert advice. My...
How safe are flexi pipes my toilet cistern has one it was changed about a year ago when the...
I recently had a plumber come over to look at a badly leaking shower head. As best I can recall...
- gavinfitz81
- 2
- 705
- Latest:
- gavinfitz81
Has anyone if this flush valve using the handle instead of the button? Are they good?
Can anyone please tell me where I might purchase a 90° bend 15mm x 22mm Isolating Valve
Thanks...
- hughglenure
- 2
- 484
- Latest:
- hughglenure
Hi,
I’m looking for guidance to access the cartridge of a leaking single handle bathroom faucet...
Boiler broke over Xmas and needs replacing and I’m tempted to move away from our 1985 gravity...
Hi all,
Happy new year!
Hope this is OK in this part of the forum.
Been a plumber for about...
- Adam McCaig
- 5
- 691
- Latest:
- oz-plumber
Hello, I want to change the system fill valve, but I’m struggling to dismantle the existing...
Terrible diagram. But can I set up a bathroom like this. I’ll be getting a plumber to do it but...
- LeighDiyHomerSimpson
- 5
- 411
- Latest:
- LeighDiyHomerSimpson
Background
24 apartments are equipped with thermal stores of (100 to 150 litres) with immersion...
- johnstockdale
- 4
- 508
- Latest:
- johnstockdale
My Mother-in-law was quoted £1,000 by British Gas to do a power flush on her system as her rads...
I'm a complete notice and I working on my heatings motorised valves on my S plan system. I was...
Toilet continuously flushing/cistern filling.
This happens regardless of what else is going on...
- CBrooke
- 3
- 632
- Latest:
- ShaunCorbs
Hi
I am trying to fit a Hive Radiator valve into my existing TRV valve body to make them...
- diy_massacre
- 1
- 670
- Latest:
- ShaunCorbs
Hi my daughters Ariston Cylinder has started to leak around the Emersion heater. She has never...
- Pete from Cambridge UK
- 2
- 580
- Latest:
- Basher
I am not a plumber, but very fluent in residential plumbing. My Daughter has a building in town...
New Threads
-
Toilet blocks/pod install advice?Hi folks Do many of you do the type of work...
- Started by macka09
- Replies: 0
-
Vaillant ecoTEC 824 - simplest 30kW replacement?Hi. Looking to replace a 13-year old 824 with...
- Started by DevsAd
- Replies: 1
-
Back boiler not heating downstairs radiator multihead 3 pumpHi I had my heating on for a few days all of a...
- Started by Misty
- Replies: 3
-
Flat plate close coupled kitHas anyone done a toilet repair on a toilet...
- Started by Matt0029
- Replies: 1
-
Toilet blocks/pods advice wanted?Hi folks Do many of you do the type of work...
- Started by macka09
- Replies: 0
-
-
-
UK UFH specialist in Norwich areahello, I have a friend who has a FAR ufh setup...
- Started by Jim Goodenough
- Replies: 0
-
Determining the last radiator in the downstairs radiator runI am attempting to find out which one is the...
- Started by elmocambo
- Replies: 4
-
WAVIN (Hep20) UFH Actuator - is newer model compatible?Hi. Mil's UFH has Wavin 230V 2W actuators -...
- Started by DevsAd
- Replies: 1
-
New combi choice - manufacturer with the 'best' controls?Hi all. Asking for a friend who is getting a...
- Started by DevsAd
- Replies: 6
-
Are Pipe Heaters Safe?I have an ouside garden tap that freezes every...
- Started by Traveller 47
- Replies: 1
-
Choice of pipe for hot water secondary/recirculating systemWhat plastic based / barrier pipe can you use...
- Started by Failte
- Replies: 7
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 5
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 10
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2