Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the UK Plumbers Forums - This is the UK Plumbers Forums. Plumbing threads related to UK rules and regulations. Advice for Plumbers in the United Kingdom. Keep Gas-related advice in the Gas Engineers Forum..
Normal Threads
Existing bathroom has skimmed plasterboard dot and dabbed to block wall. The chosen tiles are...
- ***Tom11***
- 5
- 2K
- Latest:
- ShaunCorbs
Hi guys.
I live in a bungalow with 14 radiators.
Closed loop heating system
The heating is...
Hi there.
I'm after some advice on some work that we have had done today in the house to replace...
Hi all,
I have two bathrooms where single mixer basin taps were fitted when the whole house...
SO, I have done about 30 of these and they all have the same problem... the old seal had become...
- Alex Collins
- 1
- 1K
- Latest:
- ShaunCorbs
Hi all ,
just looking for a little bit of help with this if possible. My boiler is showing low...
- ANTBOMB
- 3
- 2K
- Latest:
- centralheatking
So, I have 20 rads supplied by microbore but 1 (just one) rad has stopped working, most rads...
- Richard Shaw
- 2
- 1K
- Latest:
- centralheatking
Hello folks,
I think my Honeywell CH/HW controller has failed, so I have been looking at...
- Dark Eyes
- 5
- 3K
- Latest:
- king of pipes
Hello I am looking to put new combi boiler in , had a few quotes for different boilers any...
- najb69
- 10
- 2K
- Latest:
- townfanjon
Anyone seen a valve for a small undersink unvented cylinder that incorporats the pressure relief...
- Matt0029
- 2
- 881
- Latest:
- ShaunCorbs
Hello, I have a Potterton Promax HE Store boiler, and in the past a few times I have had to...
would it affect pipes in a bathroom if you never run water through them?
Hi all,
Been trying to fit new sink and move from pillar taps to a mixer. Previous piping was...
Hi
The fitting is brass (though doesn't look it in photo), the stuck plastic threaded pipe...
I'm having issues with my ideal logic heat 18, it was showing fd error code so I replaced the...
- Flaxxx
- 1
- 4K
- Latest:
- SimonG
Hi hope you are well.
I have a gravity fed hot and cold. Hot water cylinder is on ground floor...
- kevineaton
- 10
- 2K
- Latest:
- kevineaton
Hi all , my bath water is a light yellow colour ( not wee) mains seems ok , I have unvented...
Hi, I’m currently building a shepherds hut. I’m trying to link it up to my parents house for...
Hi I’m a level 3 apprentice based In Leeds . I need help with boiler swaps of any one can help...
- Esberkali
- 1
- 552
- Latest:
- OffshoreGas
Hi All,
I recently had a new kitchen, installed by a local company. When I opened the cupboard...
- Neddog
- 5
- 1K
- Latest:
- Neddog
Hi, I have recently purchased a bsp adapter for a npt pipe, the pipe has a 3/4" male end (thread...
- Daniel
- 5
- 1K
- Latest:
- steadyon
I am having increased water pressure issues and can not figure out why. I had a tiny hole...
Hi all,
My first post and many thanks in advance for any help offered. I am currently upgrading...
In reality though, it's done all the time. Most don't realise it shouldn't be done and the...
- Ian101
- 1
- 3K
- Latest:
- Chuck
I am quite good at most internet things but this one I don’t know really where to start..
Have a...
- centralheatking
- 1
- 506
- Latest:
- Harvest Fields
I have a 2nd pump which has recently stopped working properly. Symptoms are 1) usually loses...
- BanthaDooDoo
- 9
- 2K
- Latest:
- Chalked
Hi, I am a DIY er not a tradesman but would like a bit of info/advice about the Flowmasta 3439g...
- Matf
- 11
- 4K
- Latest:
- Brambles
There are plenty of tutorials for sealing/caulking bathtubs. However, my bathtub has a kind of...
- phloaw
- 3
- 738
- Latest:
- phloaw
Hello PFM's,
I was wondering what was everyone's fav. fittings for tieing into rads and general...
- Bazzatron
- 4
- 2K
- Latest:
- Dave Marques
I need to fit a waste into my external soil stack and it already has two strap on boss...
- Sammy_jpen
- 0
- 1K
- Latest:
- Sammy_jpen
New Threads
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0
-
An Boiler be left on with water tuned off?I have a Worcester Greenstar boiler and would...
- Started by Traveller 47
- Replies: 9
-
-
Boss your bathroom - Join the Tile High ClubTrade Account Victorian Plumbing 10% off for...- Started by Dan
- Replies: 0