Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the UK Plumbers Forums - This is the UK Plumbers Forums. Plumbing threads related to UK rules and regulations. Advice for Plumbers in the United Kingdom. Keep Gas-related advice in the Gas Engineers Forum..
Normal Threads
Hi guys and girls,
the fan on my Heatslave 20/25 doesn't start, I've had look and cleaned fuel...
- TimC74
- 4
- 694
- Latest:
- Timmy D
Hi all - hoping to get some advice here on a plumbing issue in our house.
When we are showering...
Worcester Boiler. Really annoying.
All works as it should fine in normal use. However have to...
Hi all, the second Salus programmer thermostat has failed on my Grant oil fired combi boiler...
- Uncle Nick
- 1
- 572
- Latest:
- exedon2
Any recommendations guys?
I’m looking for a central/single controller which will be located...
- Timmy D
- 7
- 1K
- Latest:
- Timmy D
I've got a leak at the connector next to the p trap under my bath at point 1. on my attached...
- hannahmacca
- 4
- 1K
- Latest:
- ShaunCorbs
Hi
My washing machine is 5m away from the water mains copper pipe/valve. I've currently got a...
- Joe123
- 2
- 990
- Latest:
- Basher
Hi guys I did a job today in a block of flats, fairly old place, plumbing was all a bit ropey in...
The bath taps have 22mm inlets currently the cold water mains 15mm is fixed to the tap by a...
Hello everyone,
I have a problem that has stumped two plumbers so I thought i'd come to a...
Hi. I’m having a loft conversion done in the Uk. My builder has made the connection for the hot...
I have a hot water cylinder which has low carbon steel pipework to it - I have tried to add some...
- chloeradhsaw
- 12
- 2K
- Latest:
- chloeradhsaw
I live in an apartment and have a cold water tank in it. The cold water tank feeds the cold...
Hi everyone - I have an old outside tap with male thread but struggling to find a right hosepipe...
- Lee Desty
- 6
- 1K
- Latest:
- ShaunCorbs
Just finished installing a second kitchen sink/new worktop/cupboard doors and painting end...
I have a pressure leak on my CH system. Our piping is buried in the walls (maybe a mistake) and...
Hi I have an outside tap that has suddenly stopped working.
Tap has been taken off and there is...
Evening guys, Having some trouble with a Megaflo Indirect Unvented Cylinder! Fitted a bathroom...
- Sfc
- 0
- 659
- Latest:
- Sfc
Hi - I've replaced the service valve on the water feed to my toilet. It's screwed on fine on the...
- Crandle
- 4
- 966
- Latest:
- king of pipes
I want to fit some trvs horizontally. Can you also with the locksheilds that way?
- Matt0029
- 7
- 636
- Latest:
- Chuck
I've got a countertop dishwasher. It's an RCA, but it's made in the same place as all the other...
I’ve got this pipe outside which water is constantly coming out of the bottom as you can see...
Hello. I have a Kohler Rite-Temp® 1/2 in. Pressure Balancing Valve with Stops. The diverter...
I needed to change waste pipes because they were just crumbling into pieces, but i am not sure...
I have a growing damp patch on my ceiling, I initially assumed it must be from the empty flat...
Potable water unvented expansion vessel needs replacing - water is coming
down the tundish...
- Topslice
- 4
- 1K
- Latest:
- fowlerboi
Hi there,
I recently purchased a flat that was built in 2016. The apartment is still under the...
Hi, can anyone advise regarding getting access to the working mechanism within this tap. It's...
- ChrisGid
- 2
- 912
- Latest:
- Timmy D
Hi - I'm a DIYer, successfully fitted an external garden tap, supply sourced from downstairs...
Help.
So I’m trying to fit a shower in a bathroom in an old tenement flat in Edinburgh...
- lynniethom
- 2
- 799
- Latest:
- lynniethom
New Threads
-
New ceramic tap gland is stiffHi, fitted some new ceramic 1/4 turn tap...
- Started by Simone
- Replies: 1
-
Toilet blocks/pod install advice?Hi folks Do many of you do the type of work...
- Started by macka09
- Replies: 0
-
Vaillant ecoTEC 824 - simplest 30kW replacement?Hi. Looking to replace a 13-year old 824 with...
- Started by DevsAd
- Replies: 13
-
Back boiler not heating downstairs radiator multihead 3 pumpHi I had my heating on for a few days all of a...
- Started by Misty
- Replies: 3
-
Flat plate close coupled kitHas anyone done a toilet repair on a toilet...
- Started by Matt0029
- Replies: 2
-
Toilet blocks/pods advice wanted?Hi folks Do many of you do the type of work...
- Started by macka09
- Replies: 0
-
-
-
UK UFH specialist in Norwich areahello, I have a friend who has a FAR ufh setup...
- Started by Jim Goodenough
- Replies: 0
-
Determining the last radiator in the downstairs radiator runI am attempting to find out which one is the...
- Started by elmocambo
- Replies: 4
-
WAVIN (Hep20) UFH Actuator - is newer model compatible?Hi. Mil's UFH has Wavin 230V 2W actuators -...
- Started by DevsAd
- Replies: 1
-
New combi choice - manufacturer with the 'best' controls?Hi all. Asking for a friend who is getting a...
- Started by DevsAd
- Replies: 6
-
Are Pipe Heaters Safe?I have an ouside garden tap that freezes every...
- Started by Traveller 47
- Replies: 1
-
Choice of pipe for hot water secondary/recirculating systemWhat plastic based / barrier pipe can you use...
- Started by Failte
- Replies: 7
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 5
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 10