Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the UK Plumbers Forums - This is the UK Plumbers Forums. Plumbing threads related to UK rules and regulations. Advice for Plumbers in the United Kingdom. Keep Gas-related advice in the Gas Engineers Forum..
Normal Threads
Hi,
I have an issue with my downstairs toilet. The Flexi pip splits and tears within weeks of...
Hey,, new condo homeowner here.. I just had a 19 year old 40 gallon gas Kenmore water heater...
Trying to find a replacement for the below sink strainer and completely stumped! all the ones i...
Does anyone recognise this make of TRV head?
Cheers
Martin
Hi all,
I have a simple 6 radiator open vent system with 5 TRV's and 1 rad permanently open, on...
- jc_150
- 5
- 1K
- Latest:
- Ric2013
I have pipework laid out as in the first of the two attached pictures (please excuse the...
- ThePhoenix
- 8
- 982
- Latest:
- Papawads
Most of my lockshield valves are the compression type onto the radiator tail. Have just...
- Bogart
- 4
- 3K
- Latest:
- Bogart
Hi Everyone,
thought I'd pick your brains on some ideas I have for controlling a DHW secondary...
Hi,
I live in an old cottage which is still fed off a spring. There's very little pressure in...
I'm fitting a bathroom basin and the water pressure is a bit fierce, I'd like to reduce the flow...
- mitchino
- 1
- 1K
- Latest:
- ShaunCorbs
Merry Christmas and a Happy New Year from all the team at CORGI direct
- CorgiDirect
- 4
- 1K
- Latest:
- king of pipes
Hi, hope someone can help me with a heating pressure loss problem. My valiant boiler has been...
Hi All
I have a Turbochim side flue fire, installed Dec 2000 and has worked well for 20 years...
MASSIVE Chemical Clearance Sale - While Stock Lasts!!
Important Information
Chemical Clearance...
- CorgiDirect
- 1
- 1K
- Latest:
- Dan
Hi, I want to change my bedroom radiator (900x500) single. Too exactly the same measurement but...
Hi I have recently had a Worchester 15i Regular boiler installed, it comes with honeywell...
Good morning!
I've had no heat in my attic bedroom for over 2 years - the rest of the...
- FeePee
- 2
- 2K
- Latest:
- king of pipes
I fitted a thermostatic mixing valve under a bath (first time outside of training) but can’t...
- PythonCrazy
- 0
- 1K
- Latest:
- PythonCrazy
Hi everyone - a mildly amusing situation!
I am not plumber but have done few bits at home over...
- Still not a plumber
- 4
- 3K
- Latest:
- king of pipes
Hi guys
Have moved into a house with a fairly old plumbing system from 70’s. However boiler has...
Good evening all,
Today I removed a bedroom radiator and capped off the ends. I started with...
Hi all. I'm having issues with the Flomasta bottom-entry fill valve in a toilet; the 'float'...
In your opinion where is the occasional drips of water coming from? I recently had a smoke...
- Jacqui22
- 4
- 914
- Latest:
- Jacqui22
My pull out kitchen tap had suddenly lost pressure. The odd thing is every other tap in the...
- Nik24nik
- 1
- 1K
- Latest:
- oz-plumber
I have a Grundfos UPS2 fitted and its become very loud humming when heating comes on, airing...
- Tom5099
- 7
- 5K
- Latest:
- John.g
Hello, I’ve fitted loads of wall hung basins in my time but this one is defeating me.
Whatever...
- richardbell81
- 15
- 3K
- Latest:
- oz-plumber
I am currently trying to solve a problem in terms of laying pipes in a screed floor. The old...
- Alf1999
- 8
- 2K
- Latest:
- ShaunCorbs
Hi,
The gas engineer installed my house radiators in August, all are new ones. But there was a...
Hi
I know you divide pipe diameter by 2.5.
Lets say 1 in 40 for 100 mm pipe
But actual fall...
- Johnyc86
- 0
- 2K
- Latest:
- Johnyc86
Rayburn 400 K problem .Hi can anyone help please? Rayburn 400 k keeps blowing fuse D2 on...
New Threads
-
Are Pipe Heaters Safe?I have an ouside garden tap that freezes every...
- Started by Traveller 47
- Replies: 0
-
Choice of pipe for hot water secondary/recirculating systemWhat plastic based / barrier pipe can you use...
- Started by Failte
- Replies: 7
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0