Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
D
DevsAd
Latest activity Postings Video About
-
-
DDevsAd replied to the thread New combi choice - manufacturer with the 'best' controls?.Thanks SCG & Gasmk1 - that sounds ideal. I'll pass that on - cheers.
-
DDevsAd reacted to Gasmk1's post in the thread New combi choice - manufacturer with the 'best' controls? with
Like.
I installed a Vaillant for my friend the lad I worked with was Vaillant approved he told my friend that tado wouldn’t work with it, but it does he is a electrical design engineer and installed it all works perfectly with a tado try on... -
DDevsAd reacted to scgf01's post in the thread New combi choice - manufacturer with the 'best' controls? with Like.
I have Tado and it modulates my Vaillant ecoTEC pro 28 perfectly. Tado can work with the Vaillant eBUS. That would be my recommendation. Have a look at the installer manuals to check how the Tado thermostat needs to be set up. My...
-
DDevsAd reacted to chrisW50450's post in the thread Vaillant ecoTEC 824 - simplest 30kW replacement? with Like.
Yes the connection plaque is identical across the entire wall mounted boiler range.
-
DDevsAd replied to the thread Vaillant ecoTEC 824 - simplest 30kW replacement?.Fab, thanks Chris - phew, a sensible move by a manufacturer (and obviously more likely to stick with the make). Cool - he's going for a Pro 28, so slightly more powerful. Thanks, Shaun.
-
DDevsAd reacted to ShaunCorbs's post in the thread Vaillant ecoTEC 824 - simplest 30kW replacement? with Like.
Missed a comma out It’s not, discontinued about 5 years ago
-
DDevsAd replied to the thread Vaillant ecoTEC 824 - simplest 30kW replacement?.Sorry, I don't understand - it was or was not discontinued 5 years ago? Ah, almost certainly discontinued.
-
DDevsAd replied to the thread Vaillant ecoTEC 824 - simplest 30kW replacement?.Thanks - I'll call them, as they take days to reply to messages.
-
DDevsAd replied to the thread Vaillant ecoTEC 824 - simplest 30kW replacement?.If the 831 still exists, it should be a straight swap. The pro 28/30 might be - I don't know. Which is why I'm asking :)
-
DDevsAd replied to the thread Vaillant ecoTEC 824 - simplest 30kW replacement?.From what I understand, the old boiler has been moved, but not yet recommissioned (part of a larger kitchen refit). Advice is to have it replaced as it's old, hence looking for an 'exact' swap if possible. Is the plus 831 still made...
-
DDevsAd replied to the thread Vaillant ecoTEC 824 - simplest 30kW replacement?.Is the 831 still available - it should be a direct swap? And then there's the ecoTEC pro 28. Anyone know about these? Piping the same?
-
DHi. Looking to replace a 13-year old 824 with a new combi as its location is being moved, so seem like a good time to also replace. The new boiler needs to be more powerful - 30kW (as against 24kW?) - as the mains supply will also be...
-
DDevsAd replied to the thread New combi choice - manufacturer with the 'best' controls?.I see what you say, but that would be true of any system with TRVs, Smart or not. I just mean that individual Smart TRVs, on at least the rads that are used on a daily basis - should provide the ultimate control, and therefore saving...
-
DDevsAd replied to the thread WAVIN (Hep20) UFH Actuator - is newer model compatible?.Just to confirm, they are a direct swap - clip on to the same ring, and operate identically.
-
DDevsAd replied to the thread New combi choice - manufacturer with the 'best' controls?.Ha-ha! I have to say, I think that Smart TRVs are great :) Ok, I only have one - in the main bedroom - as t'kids have flown t'nest, but it means I don't need to run up and down t'stairs morn and eve turning the rad manually on and...
-
DDevsAd posted the thread WAVIN (Hep20) UFH Actuator - is newer model compatible? in DIY Plumbing Advice.Hi. Mil's UFH has Wavin 230V 2W actuators - model 1026. One went 'pop', and I've ordered a replacement, but the fellow that turned up is their newer model, the 35CS498, a one-watt jobbie in a straighter-sided body. I've asked the...
-
-
DDevsAd replied to the thread New combi choice - manufacturer with the 'best' controls?.Hi Shaun. Yes, conventional rads. That's the issue - finding a boiler that will come with a set of controls to get the best out of it; fully modulating, weather comp, Smart App control, Smart TRVs. At the moment, they're struggling...
-
DDevsAd posted the thread New combi choice - manufacturer with the 'best' controls? in Gas Engineers Forum.Hi all. Asking for a friend who is getting a new combi. They'd short-listed the WB Greenstar 4000 and Vaillant ecoTec Plus 832, and asked for my thoughts. I didn't have any, other than to ask what controls they were planning to use...
-
-
Loading…
-
Loading…
-
Loading…
