Search results | Page 2

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Search results

  1. ShaunCorbs

    PRV with Gauge Question

    Correct if you look at the brass stop tap eg top on flow will be to the left when it should be going to the right
  2. ShaunCorbs

    Isolation valve with double check valve

    Filling loop
  3. ShaunCorbs

    Isolation valve with double check valve

    Yep I fit the metal handle ones from monster plumb
  4. ShaunCorbs

    PRV with Gauge Question

    The brass Stop tap is the wrong way round Sounds like it’s operating like it should Set pressure 2 bar 4 bar static
  5. ShaunCorbs

    Viva full valve double check valve

    That was in 2021 so maybe still there or updated design ?
  6. ShaunCorbs

    What we all working on this week ?

    Facebook £50
  7. ShaunCorbs

    Washing machine drain hose.

    Might be an air gap built in to the washing machine hence the sealed end into the pipe etc First picture is fine
  8. ShaunCorbs

    Shower elbow wall plate.

    Yes trim down the brass 1/2 thread to match your build up afterwards eg normally make sure the female iron fitting is flush on the front with the plasterboard etc
  9. ShaunCorbs

    Re Condensing boiler

    Ideally need an aav on the boiler pipe as the gurgling you hear is a vacuum sucking the water out of the boiler trap Or the boiler condense piping in different
  10. ShaunCorbs

    What do you think of this flexible gas hob connector?

    So has copper tube Too many fittings to convert to each end eg hob end you would need a bent female iron and the supplied cooker elbow so 3 joints that end
  11. ShaunCorbs

    What do you think of this flexible gas hob connector?

    No just use a bit of 10mm
  12. ShaunCorbs

    Any tips for a non plumber with no pilot light

    Pump on / running ?
  13. ShaunCorbs

    Any tips for a non plumber with no pilot light

    Does the pilot light at all with both buttons pressed eg gas valve button and ignition ? You have gas don’t you eg pre pay meter ?
  14. ShaunCorbs

    Hive thermostat multizone help

    You will need two eg one system pack eg for hot water and one zone eg screwfix code 246JK Then a single zone pack for the remaining zone eg screwfix code 673JK
  15. ShaunCorbs

    Not much water from shower head but high pressure in tap

    Yes same some call high flow some big bore etc
  16. ShaunCorbs

    F&e tank vent pipe pouring hot water

    Could be a few things eg feed and vent tees in the wrong place, pump too strong, pump weak and boiling over, system blocked
  17. ShaunCorbs

    Not much water from shower head but high pressure in tap

    Have you tried high flow shower hoses ?
  18. ShaunCorbs

    Inline potable expansion valves

    https://www.pumpsukltd.com/reflex-flowjet-3-4-inch-flow-through-valve.html
  19. ShaunCorbs

    Advice on a Drayton EB valve body leaking from the top

    Replace the seal if it looks like one in the link ? https://www.draytoncontrols.co.uk/product/drayton-balancing-key-and-gland-seal-pack
  20. ShaunCorbs

    Inline potable expansion valves

    Yes flow through valve not cheap around £100 for a 3/4 one
Back
Top