Search results | Page 4

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Search results

  1. ShaunCorbs

    Long right angled screwdriver

    1/4 inch spanner and a 1/4 pozi bit ? Prob need to epoxy or weld it to the spanner so there’s no movement Or if you have room Milwaukee right angle attachment and a long 1/4 extension?
  2. ShaunCorbs

    Heating oil tank (plastic) has rusty coloured layer on bottom...

    It’s silt / sludge ideally need to run the oil low and clean the tank speak to your oil supply they might be able to do this for you
  3. ShaunCorbs

    UFH and zone valves help?

    Depends if they have programmable stats on the existing manifold / independent control on the new one etc
  4. ShaunCorbs

    Introduction quick hello from a diyer

    … hello and welcome…
  5. IMG_8518.jpeg

    IMG_8518.jpeg

    • ShaunCorbs
    • Media item
    • Comments: 0
    • Category: Attachments from Threads
  6. ShaunCorbs

    Can anyone help an idiot diyer with a shower tray?

    Turn the waste fitting 45 so the angled adapter is straight at the back if that make sense
  7. ShaunCorbs

    Can anyone help an idiot diyer with a shower tray?

    you can but I would use the angled connector or a 45 degree bend see which one gets me closer and square to the wall wouldn’t use a flexi
  8. ShaunCorbs

    Can anyone help an idiot diyer with a shower tray?

    What’s the level say when it’s on the flats on the perimeter?
  9. ShaunCorbs

    DIY air conditioning system

    Can’t you get them to supply you the kit ? And you install it they vacuum and commission it ?
  10. ShaunCorbs

    Honeywell 2 ports 22mm

    I’ve got 9 going spare does anyone need any not doing singles just bulk either 4s or 5s etc
  11. ShaunCorbs

    DIY shower with exposed pipework

    Can be done need to find on that either accepts 22mm chrome tube or you can use a male iron in the end
  12. ShaunCorbs

    G3 diy (Gods not available locally)

    https://electricaldealsdirect.co.uk/santon-aquarius-a103-10-litre-3-kw-vented-oversink-water-heater.html
  13. ShaunCorbs

    G3 diy (Gods not available locally)

    Wrong sorry just doesn’t need to be building control notified
  14. ShaunCorbs

    G3 diy install who do It report to.

    Building control chances are he’s not qualified out of work hours etc
  15. ShaunCorbs

    Hello all tradesman and DIY here

    Hello and welcome
  16. ShaunCorbs

    Can a DIYer replace an expansion vessel

    No the key does nothing but divert the water into the boiler The left white hex turns the water on or off to the filling loop Only if you leave the left white hex open / undone
  17. ShaunCorbs

    Can a DIYer replace an expansion vessel

    Correct once one bar or foot and no water is draining via drain tap Remove foot pump close drain tap and re pressurise boiler as you normally would do if pressure is low
  18. ShaunCorbs

    Can a DIYer replace an expansion vessel

    Keep draining while you pump up and wait until the water stops then pump some more until you have no water coming out and the shrader gauge says 1 bar
  19. ShaunCorbs

    Shower size help/advice (DIY)

    larger screen ideally the full length of the tray
  20. ShaunCorbs

    Bar shower mixer valve help (DIY)

    Tbh common issue and tbh you won’t notice it once you start using it etc
Back
Top