basin | Page 7

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

basin

Recent contents Top users
  1. J

    Tap off hot water pipe for my basin to shower ?

    Hi, I have an Electric shower (cold incoming pipe only) in my en-suite shower unit and due to all the usual problems would prefer to add a a cold pipe (so I can install a non-electric unit) from the hot water feeding the basin which sits next to the shower cubicle. The heating system is Gas...
  2. R

    flexible basin waste use

    Got to plumb up a vanity unit to a 110 stack which is the other side of a wall hung toilet frame. There is enough clearance for a 32mm waste pipe to run between the back of the frame and the wall but its not a straight line. Can be done with some difficulty with a couple of push fit 135 deg...
  3. M

    Basin waste connection

    Morning all. I hope you're all well. Wow has it been a long time since being on here. Work and family life is nuts at the moment. I hope you're all.busy as well (if that's what you want ). I need some advice on running this basin waste. The spec shows it going into the toilet pan connector (...
  4. S

    Old Pegler basin tap

    Hi Guys, I have a old Pegler basin tap which is leaking. I want to replace the washer but I have no idea how to get the cross top handle off. The top of the handle has a red hard plastic indice which I tried to remove to try to get to the screw but it seems impossible to remove. Any ideas on...
  5. B

    Scum around bath and basin

    I live in a soft water area, the kettle for instance is as new after many years, no scale. However the wash hand basin and bath always have a scum left around them after draining like you expect in a hard water area. All types of soap, same result. I have a combi boiler, an Ideal, previous...
  6. P

    Wall mounted bathroom basin question?

    How do you fix a wall mounted basin on to block work is there some sort of secure mounting wall plate kit available? I have seen frames for stud wall but nothing for block work
  7. B

    Basin tap pipe options

    Hi all, I've got to change the taps for our small bathroom basin, the pipework comes through the wall and up to the taps, and is quite short. Is there an option to fit flexible hose as the shortest I could find is 300mm, which would mean it would have to have a coil in it, if it is flexible...
  8. T

    Hand wash basin waste

    Morning, I have a hand wash basin to install in a 1st floor cloakroom. Wc is connected through stone wall to cast iron vent pipe outside. House is Grade 2 listed farmhouse. Do you think it will be ok to run new basin waste with anti vac trap down through floor into kitchen below, approx 2.5m...
  9. O

    Basin trap issue

    Hi guys has as anyone an idea how to solve this basin with an over flow? where could I get similar parts or something equivalent? Below is the link with the picture Zippyshare.com - IMG_0381.PNG
  10. S

    basin mixer tap whooshing on cold side????

    I have a COMBI boiler system in my home and have just had my basin mixer tap in my bathroom changed. It is a premier fj315 tap and not the lift up type. The problem I have is that when the cold side is turned on, there is a huge whooshing noise where it seems like the pipes under the sink are...
  11. C

    Bc sanitan basin tap

    Need to find a replacement for this tap as both spline and cartridge have worn down Been looking and can't seem to find an identical option, or any that have ceramic piece on crossheads Believe these aren't made any more, so any advice would be appreciated Cheers
  12. F

    Enna wall hung basin manufacturer

    Can anybody tell me who makes this, l need to find the support brackets for it Its 650 x 450 and l don't want to rely on rear fixings alone in a wet room Retailers next to dumb....... It has channels and apertures for the usual rails and post cast in the underside If not, any suggestions for...
  13. K

    monobloc tap and basin hole

    I've got a monoblock tap fitted to a washbasin but it seems the basin hole is a mm or so too big as there is a small gap between the edge of the tap and the edge of the basin hole, meaning water can easily go through. Do monobloc taps and basin holes come in standard size or do you need to...
  14. B

    Can anyone identify this basin tap

    Can anyone identify this basin tap please? It has a single letter "G" at the back. I really need to know how to get the thing dismantled so I can replace the cartridge. Any ideas?
  15. A

    Basin taps need revivers but standard ones are too short

    Hi guys need some info for a friend please. Basin taps need new revivers, taken old cartridge out but when he put new ones in they just turn and turn, do not shut the water off. Tried another set with spacers to make deeper which work but keep coming apart, after a week. These are just the...
  16. L

    Wall-Hanging Basin Support Needed [Bracket] in SE5

    Hi there, I was wondering if someone on the forum could help me: Our Wall-Hanging Basin in the bathroom needs support since it is gradually coming away from the wall causing it not to drain quickly enough to avoid scum build up. I have been doing quite a lot of research to try to find a...
  17. K

    Using basin taps for a bath

    Hi, I'm building a new bathroom and wondered if it is necessary to fit bath taps for the bath. My Duotec combi boiler has a hot water flow rate of 16 l/min and a lot of basin taps are rated more than that. Using basin taps would make the pipe fitting easier ( taps will be wall mounted with...
  18. I

    Basin tap - Armitage Shanks Sensorflow Solo S8135AA

    Hi there I have a few of these taps at work and one is very intermittent and sometimes comes on on its own. I have taken the cover off the control box and there is a green led flashing away. The red one comes on when the solenoid valve clicks on. Quite often I can put my hand near the...
  19. D

    Bristan Quest basin tap

    I fitted a set of these taps two years ago and now the cold tap is dripping.I have a replacement cartridge ready to fit. Problem being that I cannot remove the lever handle to get to the cartridge. I know it is push/pull fit as iI removed it when fitting but just cannot get it to budge now. I...
  20. O

    Wash basin ?

    Hello Guys, I have got a customer who needs 2 medical / healthcare vanity wash basin without overflow as well as those medical long leaver taps to open them with elbows. Does anyone of you know where to get those type things ? The customer does not care how expensive it is as it has to be...
Back
Top