expansion vessel | Page 6

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

expansion vessel

Recent contents Top users
  1. S

    Unvented Expansion Vessel Keeps Failing

    I have a RM Stelflow 210 indirect unvented cylinder. Over the years it's been in, the expansion vessel has failed on 3 occasions. Any ideas what could be causing this? cheers, Stephen
    • stephenr
    • Thread
    • expansion expansion vessel unvented vessel
    • Replies: 3
    • Forum: Central Heating Forum
  2. finchy01

    Loads noise from expansion vessel

    I recently replaced a PRV on a cylinder that was letting by. I drained from the T&P valve and a little extra from the doc on the cold feed right before cylinder. I also repressurised the external exp vessel to just shy of 3bar as it was totally flat. I got a call yesterday saying that every ime...
  3. C

    Potable expansion vessel hose

    Hi guys , I've heard that you can't use potable expansion vessel hoses now when installing new unvented cylinder. As it is not wras approved. It must be piped up rigid .is this true ? What do you guys do ??
  4. lolipop

    Baxi duo tec expansion vessel

    Can someone enlighten me where the water comes from which lies in the combustion chamber when the expansion vessel has lost its charge ,been to 2 of these boilers recently recharged vessels but cannot spot where this water is from , I've checked the condense hose but seems fine any ideas ?
  5. W

    Worcester 25si expansion vessel removal and replacement

    Hi all, Ive got a job on to replace the expansion vessel on a 25si Worcester. Customer has test the valve and water is present. Without seeing that particular boiler model in a while can anyone recall if the thing can be removed without removing the flu that he said runs directly over and out...
    • wuzdirt
    • Thread
    • expansion expansion vessel replacement vessel worcester
    • Replies: 2
    • Forum: Central Heating Forum
  6. martind

    Expansion vessel - water O/flow problem (pic)

    After filling the expansion vessel to the specified pressure, water starts to come out of the over flow pipe. Does anyone know what the cause is?
  7. I

    Qualified G3 Plumber to Replace/Repair Expansion vessel ,Harrow area

    Hi Am looking to service or change expansion vessel as it is full of water. Connected next to Pressurized water tank. Live in the Harrow area Can you PM or reply if you are interested in the Job and if can provide estimate with parts and labour or Labour only ... Cheers Indi
    • indi64
    • Thread
    • expansion expansion vessel plumber replace vessel
    • Replies: 1
    • Forum: Air Sourced Heat Pumps
  8. woodsy

    Popped new expansion vessel

    Went to a job yesterday on a Biasi with a leak which turned out to be the expansion vessel. Ordered a new one, fitted it and started to fill and the new one popped too which freaked me out. Prv appears to be lifting which was my first thought but just wondering if anyone has had this before and...
  9. W

    H/w expansion vessel

    I need advice but I'm not a plumber, I'm a joiner.We have a house in Portugal and last year had c/h installedwith new 200litre h/w cylinder. The h/w system is non vented and the cylinder is also heated by a solar panel. A month ago the 7 bar pressure relief valve started to leak when the guage...
  10. A

    Combi Boiler Expansion Vessel Replacement Needed (Halifax area)

    Hi, I am new to the forum and I am hoping members can help. The internal expansion vessel has gone on the combi, I need a 12L external vessel fitting. Job should be simple boiler is located in garage with very easy access and plenty of locations to fix the new expansion vessel. Located in...
    • adamfax
    • Thread
    • boiler combi combi boiler expansion expansion vessel replacement vessel
    • Replies: 5
    • Forum: Boilers
  11. B

    Mini Expansion Vessel

    First post since intro! Worcester 28cdi in property when we bought. Worcester engineer when servicing says should have a mini expansion vessel in cold supply because a water meter is fitted. Boiler has worked with very few problems over the years so why is mini expansion vessel needed now...
  12. N

    Seeking advice on my expansion vessel

    I have a Vitodens 100-W WB1B 26 kw system boiler. Which I believe needs a new expansion vessel, due to when I tried checking the pressure in this vessel, I had water spray out from the valve ..... Am I right that a split may have occurred ? If so, is it a simple job to exchange new for old...
  13. A

    Gunk escaping from cyclinder expansion vessel joint

    I have just moved into a new flat which has an unvented hot water cylinder. There is some very disgusting gunky looking stuff around what appears to be a leaking joint/valve going into the expansion vessel. At first I thought it was from a botched repair attempt using some kind of foam sealant...
  14. S

    No filling loop and red expansion vessel installed. How to represurrize heating?

    Hi, I need bit of an advice about finding the filling loop in my heating system. Apologies for long description but thought to cover as much so relevant solutions can be suggested. I have spent endless hours searching internet including this forum and everywhere it is mentioned there must be...
    • samsg30
    • Thread
    • expansion expansion vessel filling heating vessel
    • Replies: 28
    • Forum: Central Heating Forum
  15. I

    Expansion Vessel Thread!!?

    Hi, does anyone happen to know what the thread size is on a Baxi 105 HE exp vessel. Its certainly not 1/4 o 3/8, really struggling as I need to site the vessel away from the boiler and unable to send back.
  16. A

    Leaking Zilmet 11A solarplus expansion vessel

    Hi all, Got a customer with a leaking expansion vessel on the solar thermal side of the system that is installed. The solar thermal system is a Kingspan solarplus with a flat roof collector and the expansion vessel has started to leak on the weld area. There is an indirect solar tank by...
  17. W

    Baxi combi 105HE expansion vessel replaced

    Hi" folks I am new to this site and was wondering if anyone could help me with my boiler problem,s. this is how it all started, my boiler was loosing pressure and had to be topped up every day, thought I solved the problem by repairing a split pipe,this seemed to cure fault for about a week then...
    • Wjl52
    • Thread
    • baxi combi expansion expansion vessel vessel
    • Replies: 2
    • Forum: Central Heating Forum
  18. D

    expansion vessel cordless inflator

    hi guys having recently struggled to top up the pressure in expansion vessels i am looking to get a cordless tool that should make the job a little easier. finding a good one though seems a little more difficult, a little bit of research points me in the direction of the bosch pag 12volt but...
    • Deleted member 44451
    • Thread
    • expansion expansion vessel vessel
    • Replies: 30
    • Forum: Central Heating Forum
  19. S

    Glowworm cx30 flexicom prv or expansion vessel fault

    Hi, my boiler was consistently dripping from the expansion vessel with the pressure at about 2 bars or higher with fault f1. I was told to bleed a radiator and pump air into the expansion vessel , so I did up to about 4 psi. Suddenly something gave and water gushed out of the safety pipe outside...
  20. B

    External expansion vessel

    Bought an expansion vessel from toolstation with mounting bracket. What a pain didn't come with locking nut to hold to bracket. I used 3/4 backnut but them female iron would not bottom out as nut was to thick.
    • buckley plumb
    • Thread
    • expansion expansion vessel vessel
    • Replies: 6
    • Forum: Central Heating Forum
Back
Top