flush | Page 2

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

flush

Recent contents Top users
  1. T

    How to remove a Roca dual flush operating plate for concealed cistern

    I need to adjust the large flush button because water continues to run after the cistern has filled up and the button does not return to its proper position, it stays depressed. The small flush button is working OK. In which direction does the dual flush operating plate need to slide/be moved?
  2. T

    Gurgling after flush, then loo drains too low and bubbles. (UK)

    Hi all, seeking advice on my toilet. (Layman here, please be gentle with me.) When we flush the loo upstairs, it flushes fine (therefore assuming no suggestion of any actual blockage) but after the flush we get a rumbly gurgling from deep within the pipework somewhere and the water level in the...
  3. M

    Roca Compatible Flush Plate

    I have 4 Roca dual flush plates with mechanical 2 red wire valves behind them. The only option seems to be to replace with their single option c£50. As all 4 have broken in exactly the same way as have most people who live on our estate I am loathed to keep buying them. Does anyone have any...
  4. Peadar

    Water flow won't stop after long flush

    My toilet flushes ok when the long flush button is pressed - but water continues to flow into the toilet bowl. No problems with the short flush. I have a Siamp Optima 50, the overflow funnel doesn’t seem to drop back down on the long flush. The short flush does all purposes but family members...
  5. B

    Compatible flush plates with Geberit UP720 (8cm)

    Hello all, We have a Geberit UP720 frame. The frame says depth 8cm. (There's also the UP320 frame, which I guess is 12cm.) We are looking at Geberit flush plates, e.g., Sigma10. Sometimes we read that UP720 is compatible with Sigma flushplats. However, sometimes flush plats are also advertised...
  6. C

    Slow Flush in toilet

    Hello My toilet flush is busted. The tank takes about 10 seconds to empty and it’s kind of showers down from the middle, rather than that sudden gush that surrounds the entire bowl. It does not generate enough force to really dispose of the waste. I replaced everything in the tank. The...
    • Chris P
    • Thread
    • flush toilet
    • Replies: 0
    • Forum: Boilers
  7. S

    System Chemical Flush Best Practice

    My first post here, looking for some advice. I've just had my boiler replaced with a worcester 4000 combi boiler. The engineer put chemical flush and inhibitor in when filling up, ran the raditors hot and then tested using a strip. And has left both in saying this is safe, and standard...
  8. E

    Orange spots. Rust. Washing machine or power flush?

    I get orange spots when washing clothes. Please see photo. I think it is rust. I’ve checked there’s no metal in the machine. I have also run a long wash with lemon juice. Neither have solved it. I read power flushing is the answer to rust elsewhere in the system. How can I tell...
  9. Bogart

    Ease of changing a lever flush to a button flush

    Is it possible to change a lever flush handle for a push button one using same cistern? If so any pitfalls I should look out for. Thanks
  10. B

    Weak flush - pneumatic button mech or flush valve?

    I have a wall hung pan with a concealed cistern. The flush is the "old style" Grohe Eau2 dual flush pneumatic button. When pressed the flush valve lifts lightly and closes giving a very short weak flush. You can manually lift the flush valve in the cistern and it moves freely, flushes fine and...
  11. BENNEJ0

    ideal standard dual flush valve problem

    i have 3 sottini toilets with a compact cistern. It has an ideal standard dual flush mechanism. 2" entry The ideal standard is poor quality in my opinion, I have replaced the washer and complete unit several times but it always leaks within a short time (between 0-18 months), I would like to...
  12. F

    Flush pipe seal leaking

    Hi all, New to this forum and new to plumbing. Only just passed Level One plumbing. I am having to go back and look at a leak from the back of a WC. The flush pipe is chrome and I have replaced the flush pipe concertina seal. The seal seems to being pushed out of the WC when flushing. The size...
  13. N

    Water quantity use and flush toilets

    In the old days, toilets used quite a lot of water when flushing. Nowday, there are what they call water saving toilets. They are not quite new in desing - I think the principle of how they work camed into the '30'-50's. I know they are based on the fact that the way of the water getts a little...
  14. B

    [Chemical] flush of existing pipework after lead pipe replacement?

    Hi there, Have bought an old house and am having the old lead water mains pipe replaced and a new stopcock location/piping installed after massively high readings from water testing by the water company. Also buying new plastic water tank to start afresh so to speak. Pipework/joinery looks to...
    • Bootsyjam
    • Thread
    • flush pipe pipework replacement
    • Replies: 1
    • Forum: UK Plumbers Forums
  15. G

    Powerful flush toilets

    We are looking for a toilet with a good design and a powerful flush as one of our family members produces rather large stools that get jammed in our current toilet - which was an emergency purchase from wicks and was very cheap, we are now ready to spend a little more for something that can do...
  16. M

    Power flush & system corrosion

    In December 2022 (i.e. 5 months ago) I had a full system power flush conducted. Now the previously clear UFH flow gauges are black again. Is it possible that enough internal corrosion could have occurred in this time period? I had a separate plumber out a month ago to test some pipework and he...
  17. C

    Firebird boiler power flush

    Hi i bought the house that Jack built and ohh has the heating been left to spoil. Prior to moving in 2 new firebird boilers were fitted, silver utility 35. The system is in dire need of a power flush and I intend on using FX2 to do the job. Can anyone advise if FX2 is ok with this boiler model ?
  18. R

    Viva Skylo flush valve - which number means more flush?

    I have a Viva Skylo flush valve and want to adjust it for maximum flushing power on the full flush. None of the instructions indicate whether a higher or lower number will achieve this, and I can't see an obvious difference in the water volume. Anyone know how the adjustment works...
  19. R

    Toilet doesn't flush properly.

    One of my toilets has air bubbles coming up every once in a while. Sometimes the toilet fills up to the top and goes down slowly. It seems to flush solids and liquids, but the paper doesn't go down. Now I've had two plumbers who couldn't fix it plus Thames Water and Dyno-rod to clear blocks...
    • roz bea
    • Thread
    • flush toilet
    • Replies: 4
    • Forum: Boilers
  20. G

    Cleaning solution flush

    Hi all, First Post on here. I am hoping someone can help with the below. I have mounted 2 new rads to a recent extention we have had. The rads are not connected up to the heating system which is a combi fed system. I thought it would be good practice to clean, flush, refill and use an...
Back
Top