head
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

head

  1. I

    Not much water from shower head but high pressure in tap

    Dear Professionals, could you please advise. I have standard mixer tap in my bath (its about 15 years old, i recently bought the house). The water comes out from tap itself in massive amounts, bath can be filled in 3min, same if i unscrew shower hose - the water will shoot up very high, however...
  2. S

    Pura shower head - too much weight for a tiny thread

    Hi there, Hopefully someone will be able to help me….. I have what I believe is a pura shower arm which has recent started leaking from the fitting which is really no wonder when you compare the weight of the shower arm (let alone the additional weight of the shower head) to the tiny female...
  3. T

    Help with continuously dripping shower head

    I've installed a new shower head and hose, replacing an old Aqualisa which started to drip. The new replacement shower head which is smaller than the original also drips. There's no leaking as expected from the new hose connections with the head or wall elbow. I've removed the cover of the...
  4. A

    help identifying clip on TRV head for replacement

    Hi I want to replace my trv heads on my radiators. However I am trying to find what the current ones are as they seem different to the typical screw on ones. These ones clip on with a spring loaded thumb turn. There is no thread on the inlet fitting to the radiator either. Any idea what I need...
  5. M

    Daryl Shower Head replacement (possibly over 30 years old)

    First of all I have to confess I am not a plumber so please bear with me! I have a Daryl enclosed shower in an ensuite bathroom. It was already installed when I moved into my house in 2006 and was probably around 10 years old even then. The other shower components work fine, but the top shower...
  6. M

    Replace shower head and hose? Possible ?

    Got a bath which is just over 10 years old and the shower head needs replacing. This photo shows the layout. I appreciate that access will be required to do this and could be achieved from the adjacent room by cutting a hole in the wall. I’m not sure what I would then see and in...
  7. L

    Replacement British Gas TRV head

    Good afternoon, I am after a replacement British Gas TRV head. I have found a direct replacement on Ebay, however they are £39.99 + £3.99 postage. Does anyone know if there is a different TRV head that will work? Kind regards, Laurence
  8. L

    How To remove RSBAS C Tap head?

    Hi, I was hoping someone might be able to help with this. The tap is a Bristan RS BAS C, the hot tap has been leaking and I've trying to get the tap off to clean the cartridges, but cant get the sphere at the end off there. Looking at the diagram, it seems that you should be able to pop the...
  9. P

    Replace basin sink tap head covers please

    Have a sink basin tap photo attached and need to replace the heads as behind they have cracked. Any idea where I can get replacement tap head covers only need to change the tap head covers really Problem is the old tap head covers wont turn! Any ideas please? Thanks
  10. J

    Mira shower head replacement

    Mira shower head. Does anyone know anything about this shower head (I will post pics) Its gotten a bit dishevelled, does it come apart easily & then just unscrew to replace with a different one ?
  11. A

    Salamander pump not working unless shower head is taken down

    Hey, here goes and I hope it works.. never used one of these before! I have a Sagittarius Ergo mixer shower min bar of pressure required 1 bar. Connect to this is a 1.5 bar Ora Salamander pump for a positive head, this was connected by a plumber of course and we’ve had it all rigged up...
  12. S

    Cold water tank sediment blocking up the shower head.

    Been getting large amounts of sediment coming through the electric shower. Had two plumbers look at the job who are unsure of how the sediment can be getting through to the electric shower. The electric shower is run off the mains not from the cold water tank. Any ideas on how this has...
  13. R

    Challenging installation 1300 FT / 600 FT of head / 40° hill

    Greetings, esteemed community members, I find myself in possession of a remote and highly inaccessible plot of land, devoid of any utilities. On this land, there exists a well housing a 10-year-old pump that has never been utilized. I intend to conduct a thorough test using a portable...
  14. J

    Can't remove quarter turn tap head

    I can't remove the tap head for the cold quarter turn tap. The hot one comes off easily as it is not used much. How can I remove the cold tap head?
  15. Jmiller7

    Cannot remove tap head

    Has anyone seen tap heads like these? Trawled the internet cannot find anything similar, after removing the grub screw I cannot for the life of me lift the tap head off tried prying with screwdriver but too scared to use excessive force and break the tap
  16. P

    Bramham stuck tap head

    Hi, i have a dripping hot tap on Bramham mono sink basin. I’ve replaced washer several times and can’t remove the tap head to deal with the cartridge. It is a screw cap cover but no additional screw underneath to release tap head. Thankyou
  17. M

    Shower head fittings for copper coonection

    I’m fitting an over head shower to an en-suite that I’m about to tile, I’m Struggling thinking about how to get the fittings flush to the tiles from the copper feed behind the boarding. Anyone any experience on the best way to sort this out? Cheers
  18. D

    Remove shower head rainfall from ceiling

    Hoping someone can help, not even a novice. In the bathroom there is a rainfall type shower head. I need to clean it. It is square and fitted into the ceiling and not sure how to remove. There is a 5mm gap from ceiling. Not tried unscrewing yet
  19. S

    Non screw trv head units

    We have these trv’s which sort grip the value they dont screw on - can I buy replacements ?
  20. C

    Shower head connections

    Have a Grohe shower head and struggling to find connections from this to my hot and cold supply pipes…. They fit 15mm threads but the thread is deep and the surface is not flat so am worried about the seal
Back
Top