ideal logic

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

ideal logic

  1. T

    Ideal logic C35+ with Halo Lite RF ( not wi-fi)

    Trying to find an answer to my question regarding "load compensation" Once Halo target temp of 20*c is reached , + another 5* (20'5*c) and the red flame in the display and green "demand" light on the reciever go out, the boiler still kicks in and out every 5- 15 mins until end of program. From...
  2. T

    Air inside ideal Logic 24 boiler system

    Hi All, Anyone know the best way to get air out of an ideal Logic 24 boiler please, I have bled all of the radiators successfully starting at the bottom of the property, and also utilised the two bleed valves at the highest point above the boiler (photo attached) but there is still air bubbling...
  3. F

    No Hot water, Fixed and Broken Again Ideal Logic 24

    Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
  4. B

    Ideal logic products of combustion in casing

    Has anyone else come across this situation? I keep detecting products of combustion inside the casing of Ideal Logic boilers. I've replaced every seal I can find, namely flue seals, turret seals, sump connection seals, burner seal, electrode seal, flame detection seal, etc, and yet still I pick...
  5. J

    Ideal Logic Code Combi E38 not working

    Turned the system from hot water only, to hot water and central heating the other day. After it working briefly, it has now stopped all together. The display isnt showing a fault or anything - it is just blank. After reading the service guide that came with it - I am confident there is power...
  6. D

    Ideal logic combi boiler with mechanical timer swap with electrical

    Hi all, i moved recently in new home and realised that there is no room external thermostat wired to the Ideal Combi boiler. There is only mechanical timer on it. I saw some videos on Internet that mechanical timer can be replaced with electrical one but i am not sure if it is compatible with...
  7. P

    Ideal Logic Combi 35 constant F1 fault

    Got up on Wednesday morning no hot water, (only cold water coming out of hot tap). Checked boiler, it had zero pressure and F1 fault showing. So I refilled the pressure using the filling loop, up to about 1bar which is where it usually is, which worked fine, had hot water all day. Same thing...
  8. F

    Pressure issues Ideal Logic Combi 30

    Hi, We have a new Ideal Logic Combi 30. A radiator today came off the wall and developed a leak. Plumber came and fixed (but didn't). At that time the boiler was fine. Today the boiler has lost pressure. I have followed the videos on yt and nothing works. Just stays telling me F1. I have...
  9. M

    Help needed on Ideal Logic Heat 15 System Boiler showing F3 error code

    Ideal Logic Heat 15 System Boiler Hi. Just started to get an F3 Fan Fault on this boiler. On power up there seems to be a quiet thump from somewhere then it goes through the start up sequence. It spends a few seconds on the ‘c’ display before coming up with the F3 error code. Can anyone advise...
  10. R

    Ideal Logic Combi ESP1 Time clock jumper link

    Hi looking to remove my existing rf time clock and refit the oem link, but the installer didn’t leave it, anyone point me in the right direction
  11. Beshman

    Need new Thermostat for 2016 Ideal Logic Plus Combi 30

    I've got a 2016 Logic PLus Combi 30 and a Salus RT505TX RF Thermostat The thermostat seems to keep losing connection, no matter the placement. It can be next to the boiler or in the next room and it still not get a connection. Just a weird blackspot in the kitchen blocking it (could be the...
  12. T

    Uncoded intermittent ignition fault, Ideal logic heat 18 .

    Ideal logic heat 18. Uncoded intermittent fault near end of days use only. Burner reignites every 15 seconds on and off, but no fault code showing. Boiler isolated and restarted okay but same uncoded fault repeated at end of next day.
  13. king of pipes

    Ideal logic heat only

    Fitted this about 5 years ago and serviced each year this time found out the flue is leaking into the boiler casing , not a 100% sure but I think theres a crack in the rear flue spigot looking at replacing it I see Ideal have changed the design, anyone had this can it be done without taking it...
  14. E

    Why does my Ideal logic +30 boiler keep going in to overheat lockout.

    The boiler runs may be 1 or 2 days before erroring. The problem started 3 months ago. The boiler would run blue light on at front an center of boiler. But the pip work out would bearly get warm. The pump should has rust water dripping from Chrome screw hole and the divert value was also...
  15. W

    Ideal Logic Combi 35

    Hi all, I've got a bit of a strange issue relating to my Ideal Logic Combi 35 which has recently started displaying a F2 error when trying to use the central heating system. The boiler works fine when using hot water, however when I try to turn on the central heating system the boiler works...
  16. S

    Ideal Logic Combi 30 - pump only keeps activating for 4 mins.

    Hi, As per the thread title, I have an Ideal Logic Combi 30 and I am having a problem with the pump, which keeps activating without any DHW/DCH. When the pump activates, it runs for exactly 4 minutes each time and this can happen as frequently as something like 5 times an hour or as...
  17. Scott_D

    New Ideal Logic thoughts?

    Anyone fitted one yet? What do you think of the changes?
  18. Husk24

    Most efficient way to heat water in tank using ideal logic boiler

    Most efficient way to heat water in tank using ideal logic boiler? Hi guys I have a water tank as pictured in my profile with an ideal logic system boiler, during summer/spring we make use of our thermal solar for heating and other times of the year the boiler, we don’t have the heating on...
  19. E

    Ideal Logic +18, intermittent fault

    Have an Ideal Logic + 18 with intermittent fault. When on demand the display constantly changes from O to C but burner doesn’t start. Can fix by switching Off then On again, but this only lasts for a day or two. As it’s an intermittent fault I’m reluctant to call out an Engineer. Any ideas?
  20. Husk24

    Ideal Logic system s30 boiler making whistling sound

    Hi guys, my boiler seems to be making a whistling sound after a while its on, if I tap it firmly it goes away, is this something to do with trapped air? Any ideas? My boiler is ideal logic s30. Video attached thanks
Back
Top