install | Page 7

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

install

Recent contents Top users
  1. cadmunkey

    Toilets continuously refilling after boiler install

    Had a new boiler installed 3 days ago, since then all four toilets in the house have had a slow drip into the bowl. Today however all 4 are filling fast and not stopping, just continuously filling into the overflow pipes. Had to turn 3 of them off at the supply. All toilets just have a standard...
  2. P

    install 2 pipe copper pipe for CH - can i combine the pipes?

    3 bed 1900s house , ground floor is concrete floor, requires 3 or 4 medium size radiators, rather than chanelling the concrete floor with 22mm copper central heating pipes (via a duct or sleeve pipe to satisfy building regulations, would it be ok to run the ground floor 22mm copper pipes using...
  3. D

    full install - pipework?

    Hi all Im new here... and new to any type of plumbing... I have a bit of a project - see attached. Could someone please help me with the following: Im going to use an IDEAL VOGUE C40 GEN2. is this ok for this installation? Have I got the pipework ok for this installation? Am I be better off...
  4. D

    full install - pipe work?

    Hi all Im new here... and new to any type of plumbing... I have a bit of a project - see attached. Could someone please tell me have I got the pipework ok for this installation? Am I be better off doing everything in copper or should I use HEP20 everywhere apart from where its chased into walls...
  5. V

    Baxi Ecoblue and Drayton Wiser install

    Hi, Can someone help me please with my issue? I have a Baxi Ecoblue +28 ERP boiler controlled by a mechanical wireless thermostat (which I really, really hate) and I would like to fit a Drayton Wiser one channel control system. The first issue I have is how to connect it. From what I know of the...
  6. L

    help with pricing to install new radiator

    Hi had a quote to install new radiator being tapped from another radiator the room is 3m so would be copper piped from that radiator to this new 1 was told if he does pipework along the wall will cost £150 in labour or under the floor £300 in labour i just dont understand he wants 45-£50 an...
  7. K

    Smart Meter install and boiler breakdown.

    Hi first time post, Got called out on a Sunday regarding a boiler breakdown. Previous day both electric and gas meters had been changed to smart meters and the boiler had been deemed AR as the pilot would light (electronic ignition) but main burner failed to light. Inspected the boiler...
    • Kevin M
    • Thread
    • boiler install meter
    • Replies: 1
    • Forum: Boilers
  8. B

    New Shower Install Causing Issues - Please Help/Advise!

    Hi All, We are experiencing some problems with both our Showers in our home. We have two Showers - in the upstairs bathroom & in a wet room downstairs. They are both connected to a Worcester Bosch 35Cdi Combi Boiler (older version) which gets regularly serviced every year. In our upstairs...
  9. M

    Flue liners install

    I am currently quoting for a job installing a 160kw boiler which will require a flue line for the flue. Do you guys have any recommendations of companies who fit these, the job is in north London.
  10. A

    Going to install a Magnetic filter some help needed identifying pipes

    Hi, new member but would appreciate any help, I am a DIYer but generally consider myself competent enough to do basic plumbing so am going to put in a Magnaclean Professional 2. I want to ensure I put it on the return as I am also going to be borrowing a Magnacleanse for an initial deep clean...
  11. jaydebruyne

    Best UFH kit to install

    hi all, Wondering if anyone can recommend a kit for c/h UFH? Cheers
  12. gingalig

    G3 diy install who do It report to.

    Hi, Not sure if its the right forum, please feel free to move if not. Went out to a leak on an unvented cylinder and found all sorts of horribles, There was no benchmark, the PRV/ temp valve, PRV expannsion valve and Pressure reduction, all linked into the same 15mm pipe, terminating into an...
  13. I

    Help identifying sink connections & availability for appliance install

    Hi everyone I am looking to purchase a Compact tabletop dishwasher from currys as shown in the link below http://i66.tinypic.com/qrisyv.png I am not sure if under my sink the connections/valves are there and free/available. I have two colour coded valves, I think the first one is connected...
  14. D

    Oil Central Heating to Gas Combi Boiler Install

    Hello. Thank you in advance for any advice. It is much appreciated. I am interested in converting our home from oil central heating to a gas combi-boiler. Background/Existing house system: We had a gas supplier promotion slipped through our letterbox saying that gas is available on our street...
    • Darkitect
    • Thread
    • boiler central central heating combi combi boiler gas engineer heating install
    • Replies: 8
    • Forum: Boilers
  15. Harvest Fields

    Vaillant Gas valve on install

    Just had my first ever Vaillant issue on install. 17.5mbar at boiler 12.5 at gas valve. :eek::eek::eek:
  16. N

    MagnaClean install - Boiler drain down?

    Hi all I want to install a MagnaClean on the boiler return and having looking at it closely I see a valve just above where it would best fit and a drain off at the bottom of the return pipe as it heads into the boiler. On he flow pipe there is another stop valve. I would obviously switch...
    • NeilR
    • Thread
    • boiler drain install
    • Replies: 2
    • Forum: Boilers
  17. Deanoss

    Advice for heating system to install

    Hi Guy's, I am moving into a property that currently has storage heating and no gas supply. The hot water system is a vented set up with tank in the loft and cylinder in a cupboard under the stairs. I have arranged for a gas connection to the house but am left wondering what to do for the best...
  18. H

    Church install controls help!

    I have an install in a church, all fairly straight forward stuff however the client isnt keen on a proper bms system and VT circuits... Whats the worst case scenario if I dont fit vt circuits and a full bms system? I get the impression they simply cant afford the additional cost. They are...
  19. king of pipes

    Landlords poor boiler install

    Last call of the day and what a mess this boiler was installed a year ago only 3 radiators in the property years old piping should have been replaced in my opion so many installer faults i could not issue a certificate on this pile of garbage how many faults can you spot and how would you...
  20. M

    New install, tigerloop issue

    Hi all. I recently installed a new oil line and boiler in a property. The line is quite a run and the appliance is higher than the tank. I put a tiger loop in and used a bucket to prime the flow and return. This all went to plan and the boiler fired with no issue. I reconnected the oil line...
Back
Top