mixer tap | Page 6

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

mixer tap

Recent contents Top users
  1. I

    LOW PRESSURE MIXER TAP & PIPING

    Hello, I have a low pressure system, but it seems I have a high pressure tap. I have amend some of the pipework to the tap anf put a full bore 15mm isolator on pipe to help keep the full flow, but the flex from the mixer are really small in diameter how can I over come this, or do I just need...
  2. J

    Monobloc twin lever mixer tap leaking from spout with taps off!

    Hi, I have a Twin lever Monobloc mixer tap leaking from the base of the spout, there are many answers to this problem online, however, the majority of issues are when the water is on and the tap is running, in my case, the base of the spout is leaking when the taps are off. Would this mean...
  3. P

    Single lever monobloc mixer tap with new cartridge is still leaking (not dripping from spout).

    The tap was leaking from its body (under the 2-way swivel handle; where you access the big brass nut and the cartridge) when turned ON more that a little bit. I've replaced the cartridge and it leaks in same way. It doesn't drip from the spout nor leak when turned off. So, as far as I can see...
  4. S

    Kitchen mixer tap 3 flexi hoses

    Hi, I have just purchased a kitchen tap. I have extremely low water pressure and I'm having trouble finding a tap that actually gives me any water, particularly hot water. Anyway the tap I have bought says it is for low water pressure (MICOE HOME - KITCHEN SINK TAP - QHKF11) however when I...
  5. N

    Mixer Tap with cold water feed only

    Hi All, I got a great deal on a basin and tap recently, the only thing is, is that I only have a cold water feed. Now obviously the mixer takes two inputs but i was wondering what my options are in terms of input. I'm ok that it's only cold water but i was wondering if there's a blanking...
  6. K

    Shower thermostatic mixer tap issues

    Good morning everyone :) I’m having issues with my thermostatic mixer on my shower, I want to strip it down and clean it up inside but I can’t seem to get in to it, I’m guessing the ceramic cover should come off to reveal a screw but it won’t budge, and doesn’t screw either, I’ve unscrewed...
  7. N

    Kitchen mixer tap support

    Hi What is a good tap support to use for a replacement kitchen mixer tap? Are the Sauer ones good and simple enough to install? There are two types of the sauer ones- circlip or full circle support. The Franke support gets mixed reviews (no pun intended)
  8. N

    Kitchen mixer tap pipe connections

    Hi New here, so hello to all. I am to replace a kitchen mixer tap which has been in since the house was built 4 years ago. Upon inspection, the plumbing doesn't include isolation valves so I need to cut off all water to the house. Before I go ahead and fit this I want to take the...
  9. M

    Need help removing bathroom mixer tap

    Hi there, I need to replace my bathroom sink mixer tap but can't remove it from the sink for the life of me. I've uploaded a few pictures of the tap from various angles. There doesn't seem to be any screws or allen key points. Has anyone seen a tap like this before and knows how to remove it...
  10. H

    Poor flow of hot water from new mono mixer tap in new fitted kitchen

    Would be very grateful for any comments about the following: Had new kitchen fitted at end of last year - same company supplied and fitted. I have a dispute that the tap fitted is not fit for purpose. I think the flow from the hot water tap is unacceptably slow. It takes ~ 4 1/2 mins to fill a...
  11. Mark Cameron

    Dripping cold water from newly fitted mixer tap

    Hi hoping for some advice please. I fitted a Bristan Easyfit mixer tap in my kitchen but the cold water continues to trickle when I close off the tap. I was unable to fit this piece (first image) as my existing pipe work already has one of these on the cold pipe then a pip to another of these...
  12. O

    Low pressure hot side bath mixer tap

    I came across a job the property has a combi boiler upstairs sink next to the boiler had hot and cold similar pressure mixer tap. there is a bathroom down stairs where the hot comes in T’s off into the basin tap good pressure same as cold side basin tap. Then the pipe finishes off in the bath...
  13. N

    Shower Mixer tap feed connection

    While ppl are here I'm also brand new member looking for some info first how do I ask my own question without hijacking someone else's. Second I've fitted a single pump to the gravity fed tank because my hot water was terrible but it keeps drawing air in from tank. I was going to fit a s flange...
  14. A

    Is it possible for a failed thermostatic bath mixer tap to cause crossover problems

    I have a central heating with storage tank system. I woke this morning to what sounded like running water, although no taps were turned on. I went to my boiler room in the basement and the pressure valve was reading 10 psi and water was running out via the pressure release valve outlet. I turned...
  15. G

    Kitchen mixer tap leaking

    Good morning, We have a Bristan mixer tap in our kitchen and this morning water has started coming out of the part circled in red below: I was just looking for advice as to how to fix this - I'm assuming (and hoping) that it is quite quick and straightforward. It only seems to happen when...
  16. F

    Ceramic monobloc mixer tap valves/cartridges

    I know it is not normal practice to use a replacement HOT water ceramic valve/cartridge in COLD water monobloc mixer tap. However, I have been told by my supplier that they are awaiting stock of the cold water valves/cartridges and apparently they come from China and could be some weeks before...
  17. F

    Poor pressure from kitchen mixer tap

    Afternoon all, We moved into new house (around 25 years old) recently. It's a gravity fed system (cold tank in loft, hot cylinder in airing cupboard upstairs). Pressure from all taps upstairs both hot and cold are fine. However the mixed tap in the kitchen has poor hot pressure (cold comes from...
  18. A

    Mixer tap re-seating tool

    Hello. This is my first post. I hope someone can help me. My kitchen tap recently started dripping from the spout and the spout is also a bit loose. I removed the spout revealing 2 washers that I changed. I re-assembled the spout but the problem persists. I guess my next option is to re-seat the...
  19. C

    Low pressure kitchen mixer tap.

    Hi, my parents recently replaced their old 15mm gravity fed kitchen mixer tap (the old fashioned sort with separate hot and cold taps, rubber washers etc). They fitted a single lever mixer (I think it was a crosswater) that claimed to be suitable for low pressure. Anyway, it's no good - reading...
  20. C

    Franke Olympu Kitchen Mixer Tap washer and O ring replacement.

    Hi, I bravely decided to replace the washers and O ring myself after the tap leaking for ages at the bit that swivels. I removed the grub screw at the back but then had to get a friend to pull the curved part out as it was stuck. I replaced the two washers and the o ring but I now can't get the...
Back
Top