pump | Page 9

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

pump

  1. salmirabile

    shower pump in a tower block flat

    hey everyone, Many thanks for any help, by the way! I live in a 2 bedroom flat and a plumber installed a positive head shower pump around 15yrs ago. Since day 1, the pump has been quite noisy (80db) but thought that was completely normal. I then rang salamander pumps to see what the level...
  2. C

    Attic bathroom pump placement

    Looking for some input here from the experts. I’m having an issue with my pump. I thought I’d get away with a positive pump as I put it beside the cylinder. I’ve run all the bathrooms off it but the attic bathroom won’t work as the faucets are above the tank head. I wonder if I change the pump...
  3. Chris Eley

    Problem with shower pump

    I have a customer with a shower pump feeding the downstairs bathroom, kitchen hot and a hot tap and mono tap upstairs but downstairs works fine but the pump won’t feed the upstairs supplies, any ideas of a fix? The upstairs will work as long as something is open downstairs to get the pump running
  4. D

    Boiler pump speed alternating

    I have a Worceseter Greenstar 12i feeding an indirect cylinder and two central heating zones, controlled by a 3 channel programmer. The heating zones have a thermostat each and TRVs on all the radiators except the towel rail. Whenever the system demands heat - to the cylinder, a heating zone, or...
  5. D

    Possible Problem with an EVOSTA 2 pump

    Hi all, I have had a new Grant boiler system fitted which powers 22 rads and an immersion heater - 8 of these rads are large double convectors. We have had a lot of issues with the install of this Grant boiler but my main issue is if the pump is man enough for this system. As mentioned it's a...
  6. H

    Water pump pressure Issues..

    Greetings, newbie here, kindly seeking advice on a water pump issue I have. Before I get started, I'd like to mention that I'm a complete novice and have no prior experience with pumps or plumbing. Basically, I'm in the process of purchasing a home that is out in the sticks and has a 120ft...
  7. D

    Best location for a water pump

    Hello all, I have an upstairs bathroom with a Triton electric shower that reduces to a freezing trickle if any taps are turn on elsewhere in the house. There is no storage tank and the water enters the property downstairs and is fed throughout the house by 15mm pipe. I'm thinking about putting...
  8. nvneplumber

    Ram pump in series with water level controller

    I have a draft Idea to connect water level control valve in series with ram pump . This setup will be inside inlet of loft tank. The Idea is to pull water from Over head tank in to loft tank quicker. Please review and suggest. water level control valve : ram pump: Design: Loft tank inlet =>...
  9. J

    Pump hoses can be bent?

    Hi, I just had a shower pump installed, but the manufactory Salamander Pumps Technical Advisor said :"The silver anti vibration hoses are bent 90 degrees. These are to be straight as per manufactory installation guide. For this reason, as how it has been installed it will not validate the...
  10. B

    How to fit Salamander Twin Pump?

    Hi all, I'm new to this site and have basic knowledge of plumbing. I'm trying to fit a water pump on the floor of my cupboard to increase the hot & cold water pressure on my sink mixer tap, bathtub and toilet (all are connected on the same pipes). But I have no idea what pipes I would need...
  11. Deamon90002004

    What is this part? It's part the boiler pump housing

    Hey all, I have an ideal logic combi 35 boiler, it's about a 2010/2011 model, I have a leak from the back of the pump on what looks like a drain valve? I'm not going to mess with it, but it's so I know what to try and say to the company for when they come out. I shall include a picture showing...
  12. S

    Adding UFH pump to existing “S” plan system

    Hi, folks, great forum bye the way . Ive been doing Diy plumbing since the early 1970’s on rad systems. I have now installed wet ufh in the cir 1800’s part of our present property and am stuck with how to control it. I have an “S” system, older L,N,E wired heat only oil boiler with no pump over...
  13. J

    W. Sussex - destrat pump to be installed

    Need somebody competent with pipework in awkward places to fit a destratification pump and appropriate nrv's to a dhw cylinder. Only the plumbing not the electrics
  14. J

    central heating pump for a baxi bermuda central heating

    need a new c/h pump.we have a baxi bermuda back boiler which serves 6 radiators would a wilo 25/1-5-130 or 25/1-6-130 i read that with this system i wouldnt need an all singing and dancing pump . advice required ?
  15. J

    Mira shower - Pump/Drainage issue

    Hi all, please advise. I moved in about 4 years ago and this shower has been here since. It looks like the pump is on it's way out?? It will extract/drain the tray once or twice and then you will hear what sounds like the pump engaging(some sort of humming noise) but water is not extracting...
  16. N

    Circulation Pump Question

    As mentioned in my 'System Drain' thread the house has been extended in 1986. In recent years I felt the circulation was not as good as it should be . I have previously replaced a section of pipe when we had blockage at point where cold feed joins together with clean and drain, refill+...
  17. J

    Shunt pump control - Viessman boiler

    Having Viessman Vitodens 200-w 32kw installed. I’m expecting to then install low loss header and secondary pump for whole house. (Size / flow rate justifies this). I’m looking for 1) confirmation that the secondary pump will be controlled via (something like) their EM-M1 controller...
  18. W

    No Central Heating, Pump faulty???

    Hi all, Central heating has packed up at my parents house, firstly it was only the upstairs Rads that were working and downstairs not now both have stopped working. I think it could be the central heating water pump as it seems a little loud with some 'odd' sounds now and then, I have tried...
  19. F

    Shower pump trigger issue

    ive been to a badly installed salamander shower pump.No independent cold supply and hot teed off 15mm to whb.If you lower the shower head 12 inches the pump will trigger which makes sense however if you have the shower head back in its normal place and operate the bar mixer it will only trigger...
  20. D

    CH pump replacement concerns.

    Hi. My Parker 15-60 130 pump has been running fine for 7 years at its highest speed. It has recently developed a knocking sound when hot and working hard (disappears on speed 2) but this is not fast enough for my 15 radiator bungalow. Bleeding the pump had no effect so I suspect it might be on...
Back
Top