taps

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

taps

Recent contents Top users
  1. I

    Not much water from shower head but high pressure in tap

    Dear Professionals, could you please advise. I have standard mixer tap in my bath (its about 15 years old, i recently bought the house). The water comes out from tap itself in massive amounts, bath can be filled in 3min, same if i unscrew shower hose - the water will shoot up very high, however...
  2. U

    Taps: quality tiers?

    Hello, I've tried searching using Bristan, Grohe, Vado etc & get no results at all - I don't understand that! Anyway, is there an existing post, or would anyone be kind enough to proffer their opinion on tap quality. As I see it, there are two parameters - quality/thickness of chrome plating...
  3. T

    Water appearing in washing machine when run kitchen taps

    Hi there! When I run hot or cold kitchen tap, clean transparent water slowly appears in washing machine - this water smells - have to scoop it out! Not sure if issue is installation - washing machine is sited not far from sink (live in flat and kitchen small). Here is a picture of the piping...
  4. H

    How to access taps behind a P shaped shower bath

    I'm about to install a P shaped shower bath into a small bathroom. However I've noticed that with the bath in place it's not possible to reach under the bath to the pre drilled tap holes. Because of the circular shape there's also no line of sight to these either making it very hard or...
  5. D

    Are there any reliable taps of this kind?

    I'm putting in a utility sink, in a limited area, that has to serve for normal wash use but also to wash a dog. I've found some taps like these[1][2][3] which seem ideal - the tap can fold back against the wall to make room for the dog, and there's a hand-held spray with a trigger on it. The...
  6. S

    Dripping hot water bath taps that has a plastic cover over the 1/4 turn cartridge.

    I have a dripping hot water bath tap. I have removed the top but underneath is a plastic cap ( see picture) but the cap will not come off to get to the cartridge, and I don't want to force it in case it breaks. Anybody any ideas on how to remove it, and if it breaks where you would be able to...
  7. C

    Best place to source low pressure bath filler taps

    I'm having a nightmare trying to find matt black wall or deck mounted bath mixer taps with 3/4 fitting that work on 0.2 bar. From tank to tap, I have around 2.4 metres, so a pressure of a little over 0.2 bar. The flow measured from the tap currently fitted is 11 litres per minute. Pretty much...
  8. T

    Bristan Taps Rigid Tails Instead of Flexi

    Hi, As I need to purchase two new taps for our en suite, I've noticed that almost all taps now come with flexi tails as standard. I've read some horror stories about these bursting / leaking so would prefer rigid fixings like the existing ones they are replacing. I'm looking to purchase this...
  9. S

    Intermittent low hot water flow all taps

    Hello All, I wonder if you can help me? I have intermittent hot water low flow from all taps in my 4 bedroom house upstairs and downstairs. I can sometimes recover the usual water pressure by turning the hot and cold water taps on and off which seems very strange to me. There is no problem...
  10. C

    Kitchen pull out mixer taps

    Hi Anyone know of a pull out kitchen tap that has decent pressure? I have had low pressure from this tap for a number of years and it's not helped with the two 10mm tails that must reduce even further. Hoping something is around that I can use 15mm full bore tails and isolating valves but all...
  11. C

    Taps and metalic taste

    We tastes metalic! Help please!have installed new mixer taps and now the water
  12. B

    Yellow water in cold and hot taps

    Can anyone help me with an ongoing issue I've had since I had an annual service on my combi boiler, which is a Potterton Performa 24. Literally after they left I started experiencing yellow water (pale) from all my taps - hot and cold, including the toilet. This was intermittent and then...
  13. T

    Noisy Taps since insides replaced

    I have quarter turn taps in my downstairs bathroom, the sink taps were getting a bit stiff so I replaced the insides with Flomasta 1/2" BSP quarter turn ceramic tap glands from Screwfix. They work fine but are really noisy unless on full flow or trickle, anything in between sounds like Niagara...
  14. B

    Is toilet water same as bathroom taps

    Hi everyone, I turned my cold water feed off in the airing cupboard which supplies only cold water to my bathroom but it also turned the water to my toilet off is that a correct set up? Because it didn't used to before the stop valve in airing cupboard only turned off the cold water supply to...
    • BobbyJoe
    • Thread
    • bathroom taps toilet water
    • Replies: 3
    • Forum: Boilers
  15. U

    Ariston microGenus blue taps

    Hi I'd be very grateful for any advice. My Ariston microGenus boiler is at least 20 years old. Every few years I've had to repressurize it. I've lost the note I had about how to do that. The boiler has two blue taps underneath. The rhs one turns clockwise. The lhs one is so stiff I can't move...
  16. N

    How Yo Connect Water Supply To New Bath Taps

    Hi I have a 22mm hot and cold water supply to new bath. The pipes finish with compression valves. I need a 500 mm tap connector hose to connect with half inch thread on the new bath tap. All the connectors at the main plumb merchants are 22mm x 3/4 inch. No one seems able to answer question...
  17. B

    How to balance water pressure in taps

    Hi everyone, Gas combi Boiler Mains fed in all taps and shower How do I balance the water pressure in all faucets in my flat. Every tap/water faucet is mains fed but the cold water is really strong in every tap that if I open the tap fully it flies out like a fountain but the hot water is not...
  18. B

    Bi Flow dual taps query

    Hi everyone, I need to replace the kitchen tap, all my neighbours have two single taps in their kitchen and bathroom whereas I have a single lever tap in the bathroom and kitchen. Due to living in a flat and having a shared water supply I was advised to get a dual flow tap for the kitchen so...
  19. T

    Mixer taps and check valves

    Hello, I have a few mixer taps to install in bathrooms and kitchen. The kitchen tap also has a wondering spray arm capability. On researching something else, i stumbled across people saying that a check valve should be placed on the cold mains feed. How can I tell if the mixer taps/spray arm mix...
  20. A

    Will councils ever fit mixer taps?

    I'm a council tenant and my bathroom basin is broken and needs replacing, it has standard pillar taps. Do you know if councils would ever replace it with a mixer tap one if I paid the difference? (I'm guessing no but it's worth a try). How much more complicated and time consuming is it to...
Back
Top