Can i add additional outdoor taps by extending an existing outdoor water line (exiting outdoor tap) or does it have to be from the water mains ? will it reduce the water pressure ?
Advice from experienced plumbers will be appreciated. I inherited the old stopcock without a disk (2 pictures below). Attempts to find a lever or disc with 8mm rectangular hole were unsuccessful and use of a locking plier was not convenient in emergency, so another stopcock was fitted after it...
Hello, I'd love some advice on my system, I've had a couple of plumbers come in that seemed to specialise in gas systems and seemed perplexed by my all-electric systems and the issues I'm having. My system is all electric heating and hot water system, in a flat on the 4th floor. The mains...
I have read a few threads including one by Debbie Stano that were similar to my issue but that thread stopped a while back without any resolution I could see.
I'm in Brisbane, Australia but I'm after general ideas from anyone here or in UK (I realise this is a UK based site).
Point form...
I live in an apartment and have a cold water tank in it. The cold water tank feeds the cold water tap in the sink and the bath. Recently, I refurbished my bathroom and, according to the plumber that fitted the new taps, high-pressure taps were fitted. Consequently, the water that comes out of...
Hi
Can anyone identify the make and model of these taps please?
We have one dripping bathroom sink tap but the plumber we had couldn't find a way to undo the tap / take it apart to get to the cartridge.
So he's saying the only way to fix it is to replace the sink taps which would mean also...
Does anyone out there have a JTP shower or JTP taps installed? (previously known as Just Taps Plus).
Have you found a JTP shower and taps durable and reliable for years after installation? And straightforward to install?
JTP is being offered by a number of our local bathroom retailers and...
HI folks, hoping to pick your brains. My bathrooms have Bastow tapware in federation style. House was built 1997, so these are 25 years old now. The spindle has a screw on shaft, that I assume lets them have just one type of spindle and then change the shaft for different colours - gold in my...
Ive troubleshooted it being the anti scold needs adjusting, however I have taken everything off the faucet to as much as I can.
I have no idea how I get past where ive got to, any ideas?
Hi there, I am in urgent need of advice!
The weather has plummeted over the past week so at nights its -6 so this may be the cause. Anyways, since early this morning there has been no water coming out from the upstairs hot taps, both sink and bath. The cold taps work fine, I have checked...
This is probably a basic one, but just wanted to check. Hot water flow to all taps has gradually been getting slower over time and the thermostatic shower now needs to be turned up hotter to get a reasonable shower temperature. Its a vented cylinder heated by an oil boiler and the cylinder stat...
Hi,
I've just had a brand new combi boiler installed just a few days ago. I've noticed that the boiler will fire up randomly with the tap light flashing meaning it's providing hot water. The only issue is no hot water taps are on/open so I don't understand why the boiler is firing up thinking a...
I'm getting water hammer in three cold water taps when turning on. If hot water is also turned on there is no water hammer. Previously I was getting all sorts of noises from the pipes even when no taps were turned on. I ran all the hot water from the hot water system via the hot water tap...
Hi
I wanted to change the washers in the taps in my downstairs cloakroom. Have got as far as shown in the pic and assumed this is removed by loosening the 14mm nut. However this does not move at all. Any advice to get to the washer please.
Thanks
We are renovating our upstairs bathrooms and there is an issue with shutting off the new mixer fittings - all six of them.
The matter is holding up progress though it seems no one knows what to do.
We built our home about 28 years ago. The only mixer we installed was in the kitchen, all the...
Hi
I have always had a poor water delivery to my bathroom and en-suit basins. The cold is just about acceptable but the hot is pathetic coming from the tank on the same floor.
Both rooms have isolator valves fitted in the correct direction and then to flexi tails that just reduce the flow...
Hi all,
I'm very new to boilers and would appreciate any advice.
I've moved into a new flat (electric only, no gas) that has an old immersion tank that keeps the water hot all day. This is costing me a fortune. The only water I need heated is for two taps and a shower.
In my old flat I had...
Just looking for some advice, I have just fitted a new kitchen sink and both water pressures are the same in hot and cold on the mixer tap, both connected to tap flexies with shut off valves, however when hot is turned on it is not turning on the hot water for the boiler, previous sink had...
Hi, I'm new here. I have a basin with two individual taps, I want to change it to a mixer - the taps measure (centre to centre) 200mm. I have looked high and low to no avail, any ideas where to get one from? I don't want to make more holes or get a new basin if I can avoid it, I just want to...
Hi all,
I'm having a lot of trouble trying to find replacement cartridges for this set of mixer taps. They were purchased approx 10 years ago. I have been told they are from ultra finishing, but they having looked at the pics state it's not one of theirs.
Any help identifying them would be...