thermostat | Page 7

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

thermostat

  1. M

    Salus RT510TX Thermostat help

    When my Salus RT510TX controller reaches the set point temperature, it continues to periodically start the boiler for approx 2mins( the flame symbols appears on the screen). When the temp goes above the set point, this stops, but as soon as it drops to the set point, it starts again.
  2. A

    Hive Thermostat without hub connected to Alexa

    Does anyone know if you can use the Hive thermostat with Alexa and not need Hive's hub. Couple of websites indicate you need a Hive Hub to communicate with your broadband router. I'm using the Honeywell T6 on my own home all linked up to Alexa via my home router and can use voice commands...
  3. S

    Boiler thermostat advice needed

    I am looking after a very old house, which has a Viessmann gas-powered boiler and thermostat, controlling the supply of water to the radiators. Most people generally suggest setting a thermostat to coincide with when they get up, go out, go to bed, etc. But my times are very irregular and...
  4. C

    Danfoss TP5000 Change programmer/thermostat?

    Hi, We currently have a two zone central heating system with a Danfoss TP5000(s?) for each zone. Unfortunately the upstairs programmer/thermostat is in the master bedroom which stays warm but the other bedrooms are much colder ~3-4c which means our kids rooms can drop below 16c at night. Is...
  5. S

    How to reprogram Danfoss thermostat as its gone off

    I'm trying to reprogram my partners Danfoss thermostat. I've set date and time and moved on to try set it up to come on and off as its continually on all the time currently. I pressed reset as per instructions as per online instructions and then pressed prog and up arrow but its now gone off...
  6. Andrew1976

    MT10RF Thermostat into Hive

    Hi Guys, I've seen few places where this has been discussed already, but I'm just wondering if anyone has had any success switching from Worcester MT10RF to an actual Hive, nest or honeywel, basicly to any smart device. If so can you please show me the way Thanks in advance for any assistance
  7. S

    Oil-fired Aga thermostat not operating properly

    Hi, I have an oil-fired Aga with a BM oil control valve and a Flexitemp thermostatic control (see the image in this thread for an example). When I bought the house I was told by the previous owner that the thermostat didn’t work and so he (and now I) have always run it by setting the flexitemp...
  8. M

    Thermostat no display

    Sorry if I seem like a novelist as I am but just seeking a little advice as I went to turn on my heat 2 days ago and noticed I had no display on my thermostat but my heat was turning on. So after checking the breaker, the batteries, making sure the door on the heater was on correctly and...
  9. PedroM

    Nest Thermostat can't detect OpenTherm connection on a Baxi boiler

    Hi, I live in Lisbon and I've just installed a Baxi combi boiler and connected it with a Google nest 3rd generation thermostat as the picture below depicts. The issue is that the nest thermostat can't detect the Boiler's OpenTherm connection and displays the following error: Does anyone has...
  10. K

    Looking for help to connect new thermostat to existing controller

    I had a indirect hot water tank replace under warranty and it has a different style thermostat that requires more wires than my old one that only had 2. Im in the middle of nowhere and help is hard to find so I thought I would post here. If somebody can direct me in the right direction to what...
  11. D

    Neomitis digital thermostat dead

    The thermostat is not showing a display even after new batteries are inserted. I've tried poutting the batteries in for five secs in reverse polarity as suggested online. Nothing. Heating does not come on unless I press the Override button, on the wall-mounted display by the boiler. Does the...
  12. P

    Smart Heating Thermostat

    Hi, When I had my old wireless (non Smart) Honeywell stat, it would peg the temperature exactly as set. It learnt when to turn the heating on and off by judging the lag. I installed a Hive smart stat. It works OK, but is dumb in this respect. Set it at 20C, and it puts the heating on when the...
  13. G

    Worcester MT10RF mechanical rf thermostat broken

    Worcester MT10RF mechanical rf thermostat is broken (dropped and all cogs dislodged) Is it possible to just replace the transmitter I.e. the part with the clock in. Also are other transmitters compatible with the MT10RF receiver
  14. U

    Why do I have to keep re-setting the immersion heater thermostat

    Dear All, My hot water cylinder (approx 45 years old) is fitted with a bottom mounted immersion heater controlled via a timer and an Essentials 7" TS220 thermostat bought from Screwfix. The cylinder itself is well lagged with two jackets and the timer kicks in every evening for 3 hours...
  15. 7

    Smart Thermostat For Alpha Evoke 28 Combi Boiler

    Hi everyone, I hope you may be able to offer some advice and/or opinions. I'd really like to install a smart thermostat for our boiler. Due to health conditions, I myself am particularly sensitive to temperature changes and have poor mobility, and therefore find the current traditional dial...
  16. L

    Removing Old Room Thermostat

    I am going to replace my existing heating system controls with a wireless smart heating system (probably Drayton Wiser). In doing so I want to remove the two existing room thermostats I have (I have two zones for my central heating). They both have three wires (as well as the earth) black...
  17. R

    Need help understanding Honeywell T4 thermostat optimisation

    I've tried to email Honeywell, but their web address is playing up and they aren't receiving. Unfortunately Honeywell is extremely poor at providing explanations even when I found the firm's online explanatory PDF that tried to explain what Honeywell means. Anyone had an answer that answers...
  18. S

    Hive thermostat recently installed. Ideal h15 boiler ..heating working but hot water is off

    I have got Ideal Heat H15 boiler and got Hive thermostat active heating installed recently by electrician. After multiple rounds the electrician managed to get heating on from the Hive thermostat. When the heating is on, boiler fires up and passes to the radiators. Pressing the Hot Water to On...
  19. M

    Advice wanted on outdoor thermostat idea?

    Hi, my current setup is as follows (I am no expert and have worked this system out myself) Ideal Logic combi+ 24 boiler TRVs on rads in all rooms apart from towel radiator in main bathroom Weather compensation sensor linked to boiler Pretty well insulated house with little draughts and good...
  20. M

    How do I turn heating on and off using thermostat

    Hi there, We recently had work done on our flat and the plumbers moved the combi-boiler to a new location and installed a few new radiators. The boiler is wired back to a new heatmiser Neo-stat thermostat. Now that it is starting to get cooler I thought I would test out the heating. So I turned...
Back
Top