My boiler is starting to randomly drop to zero pressure and turn off. When I go down to the cellar and open the filling loop, it instantly jumps back up to 1.5
Anyone ever seen this before?
Vaillant ecoTec plus 637 and gledhill 250 indirect tank control options
Hi,
I am in the process of renovating an old farm house. I have been advised to have installed the Vaillant ecoTec plus 637 system boiler with a gledhill 250l indirect tank.
I met with the heating engineers yesterday as...
Vaillant ecoTec plus 637 and gledhill 250 indirect tank control options
Hi,
I am in the process of renovating an old farm house. I have been advised to have installed the Vaillant ecoTec plus 637 system boiler with a gledhill 250l indirect tank.
I met with the heating engineers yesterday as...
It appears that the auto feature (D0) is no longer working on my boiler. My rads are taking 45 mins to get warm and the flame is now a lot lower than it used to be. I have tried gradually increasing the kw on partial load. I started using 14kw (have 9 rads) no change, and it only kicked in when...
Hello - I have an f.22 error on this system boiler, 0.4 bars. Just moved into this house so not certain on how everything works. There are no taps under the boiler to add more water.
There is a hot water cylinder in the cellar so thankfully it's just heating that we have lost.
With this...
All feedback welcome !
Here are a few details .
1.New Ecotec Vaillant boiler fitted ."protection kit/filter " paid for to get 10 year Guarantee etc .
2.Vaillant filter fitted on flow for No reason . This was coming up to 2 years ago.
3.Install company then serviced it and failed to notice...
Hello,
Hoping someone can help! Not sure what else to try.
We have a Vaillant eco tec boiler and we also have a Vaillant auro stor water heater, but for the last two months all of our hot water is coming out Lukewarm. When we first moved in it worked perfectly and the water was super hot. Our...
Hi.
Boiler is a vaillant ecotec 615 unvented system boiler.
I have changed the diverter valve plastic body (obviously no diverter valve in it).
I had a tiny drip between this and the pump housing, so I have replaced this and replaced all seals around this and the pump.
Upon running the boiler...
Hello,
I have open vent old Ideal boiler (in the kitchen)with open vent hot water cylinder.(on first floor cabinet)
We would like to change the boiler to Vaillant Ecotec Plus 624 system boiler and 210i unvented indirect Megaflow cyclinder.
How much it will cost the labour? How long it will take...
Hello,
we have a Vaillant EcoTec Plus 938 boiler and it started behaving when running in heating mode (hot water is fine - no problems with that).
The problem is that quite often when there is demand for heat (either from one of Hive TRVs or from under floor heating thermostat) boiler starts...
Unable to adjust co2 readings on a a vaillant ecotec boiler it’s an lpg model I’m currently getting 0.0004 ratio, can’t get a higher co2 percentage than 8.6% (minimum being 9.7 without cover) and the ppm is around 40
Have tried new gas valve new Venturi and new pcb. I’ve cleaned burner and...
Just wondered if anybody could help me with this one....... or advise...
Called out to an ecotec 831. fault code F61.
The gas valve had been changed by a third party a week before...
I checked the ignition electrodes and they were caked in sh*t. Cleaned and fired back up.
Advised...
Hi all, I think has been discussed before but I don't think I've seen a clear answer. We have the Vaillant boiler as above and the filling loop has started to leak from around the olive joint on the cold water side.
I would like to replace the whole loop, flexi, taps and the valves etc.
I can...
Can Someone tell me how to wire the Vaillant ecotec OV430 with the Y Plan system. Does the orange from terminal 8 junction box go to the RT terminal on the boiler (room thermostat)
Hi, A newbie here but need expert advice,
I have installers who have started fitting the boiler (Vaillant ecoTEC plus 637) replacing an old water tank loft system and cylinder in the cupboard
I'm also installing a horizontal megaflo (tempest)
Okay, so they purchased the Valliant vsmart kit...
I have a Vaillant Ecotec plus 637 boiler. The pressure is very high and pegged to the right - water is dripping out of the outside overflow through the Pressure Release Valve. An engineer has replaced the expansion vessel and checked the filling loop.
The pressure gauge is still pegged. (Note...
Hi,
We have an ecotech plus 837 in our house that was originally over rated on installation.
It was installed based on the hot water flow rate and told that the heating would modulate itself down accordingly.
This is the case in very cold weather but not when its a bit warmer.
It is now...
I've seen some replacement cartridges for Vaillant Ecotec diverter valves, just the innards. Aftermarket stuff, not official, and I know you're supposed to use official parts and all that, but the diveter valves on Vaillants are probably the weakest part i'd say.
Has anyone used them and had...
Hi My Vaillant boiler constantly show F83 and has done since installed 2.5 years ago.
The installer seems unable to sort it.
A vaillant engineer said the water is taking too long to transit because the radio control is too slow. Control now hard wired but problem remains.
Any suggestions?