valves | Page 9

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

valves

Recent contents Top users
  1. J murton

    Issue with no water coming through inlet valves

    Hi all I’ve had an issue with the amount of water coming through two side inlet valves. There are 3 toilets in total. All are tank fed. 1 toilet bottom entry. 2 toilets are side entry. The tank is above and comes down through the ceiling into the toilet through a 22mm pipe. It then t’s...
  2. M

    Life expectancy of header tanks and ball valves, relocate or replace.

    I am going to move my central heating header tank and started to think about the life expectancy of various plumbing items. The tank is polypropylene and has a brass ball valve with plastic float. It’s 40 years old. With the issues of sustainability etc, it’s it likely that these items will...
  3. S

    Swapping handles Pegler Lever ball valves

    Quick question. I installed some Pegler lever ball valves (22mm, water) and because I was tired I messed up my red/blue hot/cold colour code. Rather than swap the valves over (which I can do) can I just swap the handles over?
  4. OffshoreGas

    Isolating valves and drain points

    More often than not when I go to do any work on a domestic system there’s no way of isolating what I want to work on so end up having the drain the system. To make things worse it’s surprisingly common there’s nowhere to drain the system. Do other people find this too and if so why do you think...
  5. D

    Constant flow automatic bypass valves

    My earlier post entitled Honeywell ABV setting raised several issues and a number of well-informed comments (thank you). One topic in particular seems worth pursuing on its own, hence the present post. Your comments will be appreciated. Widely-used domestic CH pumps such as the Grundfos UPS2...
  6. A

    Does my system need h-piece and lockshield valves?

    Hello 2 storey building 3 apartments per floor Waterborne heating system description: Each apartment has separate heating distribution manifold cabinet. Manifold based distribution system where each panel is served by its own circuit. STAD valve in the second floor manifold cabinet for the...
  7. A

    Leaking radiator after bleeding valves

    Hi everyone, I was wondering if someone could provide me some advice. Due to high boiler pressure, I bled some of my radiators. However, one of radiators is now leaking on both sides from a nut at the spindles? Could some explain to me why this happened and what I can do about it? I’m...
  8. townfanjon

    Double check valves ??

    Guys , I look after a large dentist and the waterboard have done assessment / check this afternoon and want some ECED valves fitting , I have never heard of them but pretty sure they are just double check valves, does anybody know if they are a specific type of valve or just the usual double...
  9. S

    Towel rail valves open or closed!

    Hi I’ve just fitted a towel rail. Should both valves be open to fill it? And stay open once filled and bleed? Thanks
  10. Ricardo Napoli

    New builds zone valves on combi

    Hi everyone, if anybody is out there that can give a little help would be great. I’m going from domestic plumbing into house bashing end of the month now I’ve been told the heating on new builds is zoned off even on combi boilers. Could anybody just shine some light on how to pipe this system...
  11. P

    Advice on Air Admittance Valves please

    Hi I have a client who has three WC's served by one long waste pipe feeding into a soil pipe. When the WC on the far left is flushed it causes either one or both of the other WC 's to overflow. I think it must be because an Air Admittance Valve has not been fitted? Would you agree? If so what...
  12. N

    Thermostatic Rad Valves not working correctly

    Hi we have recently had a new Ideal Logic+ boiler installed the plumber has put thermostatic radiator valves in all of the rooms apart from where the thermostat is. The system is fed by micro-bore downstairs and half inch upstairs. The rooms with 2 radiators is where the problem is one radiator...
  13. S

    Check valves and mixer taps

    I noticed that the mixer tap was making the sound of running water when the main valve was open but the tap and the spray attachment was closed. I theorised that cold water was running into the hot pipe, as it is much higher pressure. I went online and concluded that the solution was a check...
  14. CorgiDirect

    Excellent Prices on CORGI Controls & Valves. Synchron Motor Only £7.08 ex vat

    Excellent Prices on CORGI Controls & Valves. CORGI SYNCHRON MOTOR only £7.08 ex vat CORGI 22MM AUTOMATIC BYPASS VALVE Only £9.92 ex vat. View Range Here
  15. TonyQJ

    Connect old rad valves to new rad

    Hi Guys. Sorry for such a long first post. We have a 24 year old 10mm microbore ch system and on the advice of a plumber I’m going to change the rads a room at a time, as and when we decorate, to slowly achieve a more efficient system. I’m aware that modern metric rads will require an extender...
  16. R

    Rad Valves - can you swap the TRV?

    Hi guys, My first post so be gentle! I want to get this rad and the TRV will be sticking out as per this picture: I'll be replacing this with my own TRV which will mean the whole thing sticks out 12-13cm from the wall (far too much). My question is - can I swap the valve connections around...
  17. A

    8mm microbore, twin entry radiator valves and ancient radiators

    Friends, romans, countrymen Spartacus.... few things going on here. as per the title i have a central heating system running through 8mm microbore copper piping to old cast radiators using the completely redundant twin / dual entry radiator valves. not ideal i know. on the positive side the...
  18. F

    Ceramic monobloc mixer tap valves/cartridges

    I know it is not normal practice to use a replacement HOT water ceramic valve/cartridge in COLD water monobloc mixer tap. However, I have been told by my supplier that they are awaiting stock of the cold water valves/cartridges and apparently they come from China and could be some weeks before...
  19. C

    UFH problem: flow valves not rising and falling

    Hi all, I have an issue with my UFH that I hope you can help with. We have UFH but have never been 100% sure that it works as it should: the lounge/kitchen (one room) has been fine, but the bedrooms have always been a bit chilly. I've put this down to them being carpeted and it taking longer...
  20. Pickwickpick

    Flow regulator ball valves

    I got given a bag of unused CP961 flow regulator ball valves (same as in the pic) years ago by my mum (she found them in rental she was clearing out between tenants), they ended up at the bottom of a box and promptly forgot about them til I was having a tidy up earlier today. I've tried opening...
Back
Top