Hi, just a quick question about the standard way you connect 40mm waste pipe to the outlet of this waste I have. The waste outlet is too big compared to the tube to be solvent welded (it's more like 43mm internal diam) and there are no threads to allow a compression fitting, I'm confused.
Pics...
Hi
I have a problem about waste pipe positioned over the front door
A bathroom was turned into a 3rd bedroom. The toilet and sink was moved to a storage room just behind the 3rd bedroom. The waste pipes were put under the floor. Everything works fine but the customer wants the waste pipe to be...
We have a problem with a downstairs bathroom toilet. When flushed, the water in the bowl rises, as does the water coming up from the shower drain. The water then drops quite quickly, accompanied by a rumbling, gurgling noise....
Suspecting a blockage in the soil pipe leading from the bathroom...
Hi guys, just want to get advice, i want to replace venten to unvented cylinder, is it ok to install D2 pipe to toilet waste pipe see picture? as there is no easy options to get it outside.
Hi, grateful for any advice
I need to connect a dishwasher waste water outflow pipe 25mm to 50mm waste pipe.
Is there a joining piece anyone can recommend? Maybe with some appropriate tape.
The waste pipe is in the wall but was trimmed at some point (unnecessarily) to only 10mm extruding from...
Hi I need to this cast iron pipe back as my new back to wall toilet won’t fit otherwise. Cutting it back i am going to lose the collar. So what fitting can I get for it I would like a flex as it will easier for me when installing the new toilet
I removed the tile floor in my bathroom to fit vinyl and I noticed that the loo now leaks slightly when I flush it. I haven’t put the vinyl down yet, so I can build up the floor under the loo if needed to put it back to the level it was, but maybe I can re-seat the big plastic flange slightly or...
I have moved our washing machine into the garage but there isn’t a drain for the waste pipe. The attached image is of the waste pipe with the condensate pipe from the boiler, can I use a tee join and connect the washing machine pipe? The pipe leads outside and is saddled to the main waste pipe.
Hi could anyone give advice please ? I went to look at a new build for sale they are apartments/ one house on top of another all properties will be privately owned by individual buyers, a guy on-site pointed out that the plumbing is wrong on the properties as a perspective buyer I’d like to know...
Hi folks
As mentioned in the title, are there any solutions to the problem, other than cutting an access to waste pipe and cutting pipe at nearest elbow or tee?
Hair has been removed as much as possible and a drain cleaner used but still very slow to drain.
I’m not keen on strong chemicals...
I have just moved into a flat and the water waste pipe from the flat above goes through our bathroom. Whoever lived here before had painted it but I’m guessing with normal paint and the paint is flaking off, presumably due to water heat. The pipe is about 7ft tall and about 15cm wide. Would it...
Hi Everyone,
Can anyone help? I have been searching but with no luck. I am trying to fit a Duravit shower trap which has a 50mm outside diameter euro pipe size outlet. I need to attach it to a 40mm UK size waste pipe and would prefer to solvent weld it as the pipe will be under a tiled...
Think I know the answer is no but asking just in case. I have a solvent weld bathroom waste with lots of connectors in it that disappears into the wall with a right angle connector. There is no place to break into it to connect up a new arrangement for a new sink. So does anyone make a...
small hole in plastic waste pipe which is the better fix ?
Hi there need some advice please, i have drilled a small hole in the plastic waste pipe which serves the sink & shower in the loft when doing some work in the toilet underneath on the ceiling i have cut away the plasterboard to reveal...
Hi,
came across this old push fit waste pipe. Stripped out the old shower and it was a 40mm waste pipe siliconed in the fitting.
The fittings at floor level so I’d be looking to bend (90 degrees) straight away so I can get the lowest possible shower tray.
Could someone advise what I could...
A while ago I replaced a leaky, corroded sink trap. That all appears to be fine, I can't find any leaks with it, and everything under the sink appears to be consistently dry.
The problem I have is that there appears to be a leak where the waste pipe out from the bottle trap meets the wall...
Hi Folks, I want to connect a bath waste outlet to a hose, but I'm struggling to configure it. It's for a temporary rainwater collection system that's being installed on a remote farm. I need to get from the plughole to a connector that will fit a hose. But I keep drawing a blank, but I'm...
I've attempted to replace the waste plug but couldn't get the nut undone but not the sink is leaking at the waste pipe connection.
I've unscrewed the large white cover and where the pipe connects with the metal sink part it is leaking, I separate the 2 parts - would plumbers mate work or is that...
We have just had a drain specialist in greater Manchester who said that our builders (uncontactable) laid our 40mm pvc waste pipe from the kitchen island to outside (about 3 meters, suspended floor, just about a crawl space underneath when floor lifted) too flat and there’s standing water, smell...