hi
Got a customer where installed above boiler 9months ago and has been working fine. They called complaining that the rads and hot water not getting very hot especially when both were on together.
Checked system and boiler and found after doing a gas rating check it was only running at 7kw...
I have no problems with one of the showers or the 4 sink basins in my house but when we use the main shower, the Worcester Bosch Greenstar 40 HE boiler overheats, giving error E9. This has started recently after 10 years of good working order.
Other facts:
1) The water temperature in the shower...
Hi
I would appreciate some advice as my boiler has a small leak from cold water feed
at the back of boiler. The bit where the copper pipe feeds into the cold water inlet filter.
Is it possible to fix this easily myself, or how much would it cost for a plumber to fix.
Thanks
jim
Hi guys,
Had a new Worcester 29cdi boiler fitted in January at the start of a refurb. Was replacing an old back boiler. Had Yorkshire water out and although the pressure wasn't the best they said it was enough to support a combi. Got a Worcester accredited installer on board and he said the...
mark67
Thread
bosch
gas engineer
hot water
water
worcesterworcesterbosch
Hello All,
I would be grateful for your thoughts on a problem with my Greenstar 24Ri running a vented system with HW Cylinder, CH and UFH.
Since approx April the CH & UFH have been off with HW timed for early morning / evening daily.
In mid-August, we awoke to no HW and boiler was flashing...
Plumbfix are selling the Baxi duo tec 24 for £560 ex vat and the WB greenstar 25 SI £898 ex vat.
Baxi has 7 year warranty, WB 5 years.
Why are WB boilers so much more expensive?
After going to a couple of WB training days, I was really impressed. I've been telling customers that they're the...
i usually stay away from wb'sproducts but i have to service a wb junior tommorow i know that you have to put the gauge on the flue and i know for the particular model the reading must be greater than -3.1 mb but im never sure which way is greater as in more vacuum ie a reading of -3.2 or less...
Hi Chaps - first post on here, so be gentle :)
We'll be getting a new oil-fired CH system fitted this summer, and will require an external boiler.
Speaking to various installers, it looks like a straight fight between the Grant Vortex Pro 15-26kW and the Worcester Bosch Danesmoor 18/25kW. Both...
Hey,
Just fitted WB 24i system boiler and the blue light does not stay lit while the boiler is on but it all operates fine apart from the blue light
It flashes when goes to lock out etc Eg i shut the gas off or reduce pressure
Any thoughts
Cheers
Hi all, I'm new to the forum; I currently work in South Wales for a plumbing and heating company. We have just won a contract with a local council and they have said they are interested in the new WB models 25i and 30i. They were launched beginning of May - just wondering if anyone has looked...
As you all know, the ErP directive comes into force later this summer, and all boilers being shipped from manufacturers after 31st July have to meet the standard - which usually means uprating the pump to an A rated one.
There is no legal requirement for merchants to stop stocking non-ErP...
just been to service a WB greenstar 28 fsn, what a mess.
long storey short, the flue was not fixed down onto the boiler correctly, the normal 3x machine screws are missing. Does anybody 1, know if you can buy these 3 x screws as a spare part? 2x what the size is of said machine screw?
i was...
got a w/b 24i junior, the pressure reads '0' yet the boiler runs perfectly!.
any of you seen this before or can shed light why it continues to run?
if the boiler is topped up then the guage will read the pressure so it is actually working.
Hi
With a Worcester Bosch system boiler (its new just 4 years old and a Greenstar 30CDi ) what is the best set up to have it with an unvented hot water cylinder or a vented hot water cylinder (which is what we have at present) ?
Because we are having problems with the air getting into the...
loziv
Thread
boiler
bosch
cylinder
hot water
system
unvented
water
water cylinder
worcesterworcesterbosch
Hi All
I have a Worcester Bosch Heatslave 26/32 which has proven to be a very reliable boiler.
but has developed a fault over the last couple of months.
The hot water works fine with no problems.
The timer turns the hot water and and the heating on and off at the correct times.
However...
Went round to price up for a heat only boiler to a combi swap yesterday. The woman is adamant on keeping the boiler in the same location which is in a kitchen cupboard that's only 310mm deep at most.
What I would like to know as I normally fit ideals (with a stand off kit to allow the pipes up...
Hi, all lights showing things good. Water pressure good. Pump running continuously on switch on. Fan not rotating but if I spin it by hand it seems free. Sometimes the code C1 comes up which is fan, but on checking there is no power from the circuit board to the fan connection. Any ideas please?
JohnHuson
Thread
bosch
gas engineer
greenstar
power
worcesterworcesterbosch
I have been looking for the above online and I am getting 3 different figures. One says -3.9 another says -4.1and another says -4.5. Which one is one do I go by? I called the technical and he said as long as it is better that 3.9 it is all good. Do people agree with thats
I have recently moved into a property that had a new oil fired boiler installed approximately 2.5 years ago.
The boiler is in the attached garage and the flue goes through the garage roof, 3.5 inches parallel to the cottage wall. The flue has a 90 degree outlet (termination ?) at the end of...
Hi all,
I'm wondering if someone can share some experience. I trying to add the Sundial RF2 pack3 to have a wireless thermostat. The wiring digrams from Worcestrer and Honeywell seem to contradict one another. I need a wiring diagram that is accurate and includes a BDR1-T relay.
Any one can help?
MarkS1980
Thread
boiler
bosch
honeywell
system
thermostat
worcesterworcesterbosch