12 showers | Showers and Wetrooms Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss 12 showers in the Showers and Wetrooms Advice area at Plumbers Forums

L

Liam

Hello everyone,
been giving the task of fitting 12 showers in a sports centre from a friend. I am a plumber, heating engineer but only ever do heatings. What would be best to fit for these showers, so there is enough and sufficient hot water? Any advice would be great. Thanks
 
My friend is helping me do the job, so I will do what I do best and stick to the heating. But are they fairly easy to fit and what one would you recomend?
 
Upvote 0
Hello everyone,
been giving the task of fitting 12 showers in a sports centre from a friend. I am a plumber, heating engineer but only ever do heatings. What would be best to fit for these showers, so there is enough and sufficient hot water? Any advice would be great. Thanks


what sort of heating have you been doing??
 
Upvote 0
May be worth contacting lochinvar/ andrews rep and have a chat to see what they would recommend from there range.

I'd be fitting flow restrictors to each shower to make sure the flow you have allowed for each is all that is taken. Possibly a secondary circulator depending on site layout. TMV's as already said, and correctly sized.
 
Upvote 0
Like others have pointed out, you need the spec. Get it wrong and it could cost you dearly.... Any other plumbing or heating works for you to do on this job or just the showers, wc's and basins? Could be a good opportunity for you to get your foot in the door for these 'larger' jobs though....
 
Upvote 0
Like others have pointed out, you need the spec. Get it wrong and it could cost you dearly.... Any other plumbing or heating works for you to do on this job or just the showers, wc's and basins? Could be a good opportunity for you to get your foot in the door for these 'larger' jobs though....
I know be great experience but am thinking it's more of a favour for a mate. It's only a small changing room. I really don't think there will be a spec.
 
Upvote 0

Similar plumbing topics

S
  • Question
No photo shown. It is usual to apply ptfe tape...
Replies
1
Views
325
  • Question
This might be of interest...
Replies
1
Views
594
  • Question
The jolt, possibly something to do with the...
Replies
7
Views
926
  • Question
Looks like the original washer and washer seat...
Replies
2
Views
670
  • Question
Thanks Maryplumb, I didn’t know it had to have...
Replies
2
Views
2K
Back
Top