£186 poorer | Plumbing Jobs | The Job-board | Page 3 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

  • Thread starter mountainman
  • Start date
  • Replies 106
  • Views 12K

Discuss £186 poorer in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
True but I've also got new contract , but I need oil as my old mentor has now fully retired from the trade and he/we/I still have some good commercial properties on oil , of which 4 boilers are due services in April
 
True but I've also got new contract , but I need oil as my old mentor has now fully retired from the trade and he/we/I still have some good commercial properties on oil , of which 4 boilers are due services in April

I see pal, if you get stuck, Mark does commercial oil on anything, Nu way, EOGB ETC ETC, I used to but don't bother now, hate my tools and van stinking up lol, can always get him to sub pal, if you get mowed out!
 
Oft10-101 only qualifies you for domestic and light commercial though Lee, depending on the size of these boilers you've taken on I would suggest you look into the oft10-201 - commercial up to 2Mw, I would also strongly recommend oft10-600a - installation and maintenance of commercial and industrial oil tanks.
 
Oft10-101 only qualifies you for domestic and light commercial though Lee, depending on the size of these boilers you've taken on I would suggest you look into the oft10-201 - commercial up to 2Mw, I would also strongly recommend oft10-600a - installation and maintenance of commercial and industrial oil tanks.
You'd spoil a good breakfast
 
I'm due in a couple of months time as well.
Always amazed how some people find the classroom/workshop such a different enviroment and really freeze.
I remember last assessment when a guy in other bay was asked questions that I'd just been asked, he had no idea and was only 10 feet from where I was.
The guy was in late 50's and been doing it for ever and a day but just couldn't get the answers out.
 
You'd spoil a good breakfast
PMSL.... Mark has em all Lee, we also do LPG commercial, my commercial are due this October, won't be doing them all like before, dropping com cat 4&5 keeping 1,2&3 though as well as commercial laundry etc
 
I'm due in a couple of months time as well.
Always amazed how some people find the classroom/workshop such a different enviroment and really freeze.
I remember last assessment when a guy in other bay was asked questions that I'd just been asked, he had no idea and was only 10 feet from where I was.
The guy was in late 50's and been doing it for ever and a day but just couldn't get the answers out.

sadly seen this quite a few times, on good guys that do the job with their eyes shut too!
 
That sounds like Dave...Roy is 6ft Dave Dickinson orange tan, "is everybody happy" that's his saying

Roy's a legend, top guy. Sadly retired last year though.
 
1,000,000 infractions issued insulting a yorkshire men by associating a over the pennine monkey with us

Worst thing ever. Yorkshireman with power.

Actually, that's the 2nd worst thing.

Giving a gavel to a Scotsman would be the worst thing.
 
carry on sun beam im going to get my sharpie pen out of the van draw a line right down the centre of your bald head and call it my BUTT
 
Im in Leeds NGST too, next week. £1100. + weeks earnings. Been going there years. I was told one of the lads passed away.
 
Status
Not open for further replies.

Similar plumbing topics

Partly insurance but mainly because 'you' are...
Replies
3
Views
187
Size of bathroom 230cm x 210cm Height 230cm...
Replies
0
Views
591
Who said plastic 28/22mm copper tube and mlcp...
Replies
3
Views
802
If this is your model, some of your questions...
Replies
1
Views
577
  • Question
I'm lucky enough to be able to 'aquire '...
Replies
1
Views
641
Back
Top