4” pipe lagging query?? | Plumbing Zone | All Other Country's | Plumbers Forums
Guest viewing is limited

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss 4” pipe lagging query?? in the Plumbing Zone | All Other Country's area at Plumbers Forums

macka09

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,248
Hi folks
I don’t normally do much pipe lagging but I need to lag some rain water pipe work.

Thing is I’m struggling with lagging the branches properly. Any advice that could be useful?? I’m using foil faced rockwool.

Cheers
 
What are you struggling with the dia or the branch bend ?
 
Upvote 0
The branch bend. Cutting the lagging like you would for the usual size pipe just doesn’t work.

It won’t as it’s swept so you will have to nibble / curf cut the inside radius
 
Upvote 0
This may be a silly question but why are you lagging a rainwater pipe?

They are normally empty and when it is raining, it isn't freezing.

Apologies if I have missed the point.
 
Upvote 0
This may be a silly question but why are you lagging a rainwater pipe?

They are normally empty and when it is raining, it isn't freezing.

Apologies if I have missed the point.

I’m guessing sound is the issue
 
Upvote 0

Similar plumbing topics

  • Question
Ahh ok. Is the foam pipe one? If so I just...
Replies
4
Views
628
  • Question
Best to be air on the side of caution this...
Replies
4
Views
2K
  • Question
There's worse work than somewhere or other...
Replies
5
Views
1K
  • Question
Thanks for the reply. I didn’t get a photo...
Replies
2
Views
410
  • Question
I know there are such things as heat meters...
Replies
1
Views
576
Back
Top