A question for Self Employed Gas Safe Engineers | Gas Engineers Forum | Page 2 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss A question for Self Employed Gas Safe Engineers in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
My favourite is how much to fit a cooker it's only a hose. And it's been fine for twenty years without a chain/stability bracket.
 
I remember going to one where two girls had tried fitting the new cooker by hand screwing the new hose into the back lol with no paste or tape
 
One of my best was the bayonet fitted to the cooker, so if it was disconnected gas could escape freely.
 
Here's a new one. Custard rang to re-install his daughters gas cooker. He'd fitted new one over Hols as emergency measure and had'nt slept properly since! Punter with a consciense. Wow! (Paid me, too)
 
Status
Not open for further replies.

Similar plumbing topics

Hello Alex, I am a self employed engineer and...
Replies
1
Views
1K
Neil Ambrose
N
If you can afford to lose 1/2 or more of your...
Replies
7
Views
2K
I
No your fine just make sure there registered...
Replies
1
Views
1K
    • Like
Hello and welcome
Replies
4
Views
912
Morning All. We have a gas safe inspection...
Replies
0
Views
1K
Back
Top