I'm getting price on both, the 630 (30Kw) and the usual 28Kw Duo Tec.
what is the best one ?
-
We recommend uHeat for Underfloor Heating Systems, and The Wetroom Store for all things bathrooms and wetrooms. They provide discounts for forum members.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
ADVISE PLEASE - What replacement boiler for Ferroli DOMIcompact F24B ?
- Thread starter bilabonic
- Start date
-
- Tags
- boiler ferroli replacement
I'm getting price on both, the 630 (30Kw) and the usual 28Kw Duo Tec.
what is the best one ?
I would go duo as it's time proven but it's slightly noisy
My mate has a Vaillant and he's had 2 new fans on it !
They always seem to **** up when he's away on hols..lol
Baxi ALL the way !!
Each to their own mate. Not had issues with the ones I’ve fitted. Must be bad luck on his part.
Baxi do not make ecotec mate.
I know what you meant mate. I was being. A bell. Sorry.😀
Bloody Italians !!
Glad you got it sorted. Any pictures??
This was what was stated, i was not there at time of fitting.
Baxi duo tec 28
New flue supported as well through roof
Chemical flush
Hot flush
Inhibitor
All required documentation Registration with gas safe Warranty
£1500
You also cannot get all documents on the day. The boiler has to be registered with manufacturer and gas safe. Paperwork takes a few days normally. Also definitely no powerflush there. Any filters?
I do have pic BUT it's just the boiler itself, i was surprised ALL the existing Ferroli piping virtually aligned with the Baxi, ie no crossovers.
I did go up the attic as well and checked the flue etc, all new x2 45 degrees and x2 supports. (I installed a wired room stat i had spare).
ALL other quotes were £1550-£1700.
Cannot see a filter on the heating or on the incoming. I also wouldn’t couple the condense like that. But as long as it is safe and you are happy.
Also you shouldn’t be taking the case off the boiler to fit your stat. YOU ARE NOT GAS SAFE REGISTERED.
I had a gas safe cert, boiler was registered on the day with baxi andgas safe register, i will have them in the post, no filter.
I never removed the boiler cover just 'dropped down' the the bottom part to remove link/fit stat...
I'm a spark, how many plumbers on here are Part P or similar to connect the mains ??
No filter mean no warranty. They need to fit a filter.
Don't need to be part p unless your fitting the fused spur from that were fine to wire
In theory if cleaned and inhb installed there's no need for a filter but it's worth a 100 just for peace of mind
Warrenty ok with no filter aslong as system is cleaned / clean
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.