Another unvented tangle | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Another unvented tangle in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Best

Esteemed
Plumber
Subscribed
Messages
10,026
I came across this unvented install. Seems the plumbers just do the first fix, any old fix and then later find their pipes are all in the wrong places when they go to finally pipe it all.
No drain cock fitted, D1 is maybe 2 metres long, combination valve is low down and at back of unit with a pipe in front of it. Tundish is just past combination valve and hard to see. Probably 22mm D2 is wrong as likely over 9m regs I bet, (haven't checked it yet). MIs book is sitting on the shelf. :smile:
image.jpg
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Any pictures of the cylinder install ? The...
Replies
4
Views
2K
Replies
16
Views
4K
T
  • Locked
Thanks Best , there is a gully with a cast...
2
Replies
34
Views
3K
timmytank
T
  • Locked
all training is backed up by horror stories of...
Replies
31
Views
483
Back
Top