Best drain down hose - what do you use? | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Best drain down hose - what do you use? in the Plumbing Jobs | The Job-board area at Plumbers Forums

I bought an expensive FITT hose from Screwfix (this one, I think: Fitt 30m Heavy Braided NTS Wintech Hose ). Very good. Almost impossible to kink but soft enough to go onto draw-off cocks.

Can't understand why you would spend the money on a non-reinforced rubber hose that explodes under mains pressure and collapses under vacuum when this works well both as a drain off and under pressure! Perhaps someone can explain?
 
upload_2018-4-18_16-10-34.jpeg
 
Powerflush/magnacleanse hose

Same stuff but there's a place not far away that manufactures it. I bought 1/2" and 3/8" hoses for draining and siphoning off. I also bought some 1 1/4" for something else.
I have had them for Donkeys Years now. They have got shorter by 2" every so often as I sometimes cut bits off when the ends split. I use those hoses because I can see through them and they seldom kink.

There you go, an in depth report on the hoses used by Last Plumber on a day to day basis.
 
Same stuff but there's a place not far away that manufactures it. I bought 1/2" and 3/8" hoses for draining and siphoning off. I also bought some 1 1/4" for something else.
I have had them for Donkeys Years now. They have got shorter by 2" every so often as I sometimes cut bits off when the ends split. I use those hoses because I can see through them and they seldom kink.

There you go, an in depth report on the hoses used by Last Plumber on a day to day basis.

Purge ?
 
I got one of the orange rubber ones that have already been posted, it cost about £25 but i'm so glad i did, i spent so long unravelling the garden hose i had and trying to un kink it. Also it's bendier so lays flatter and drains down easier.
 
You need to spend good money to get a good hose. Those rubber ones are decent but short. I brought 50m of hozlock garden hose there top of the range anti Knick and cut it into 4 lengths. Longest only used to drain tanks and cylinder. Had it for 10 years plus, still in great condition.
 
It would certainly save having to try to use the ballcock as a means of filling the hose and getting the siphon going. Nothing quite so satisfying as siphoning out the crud from a cistern.

£18 for a one-way valve does seem a lot, but in the scheme of things...

I look forward to hearing how well this works.
 

Similar plumbing topics

Hi All This is following on from thread I...
Replies
0
Views
594
Hi How simple is it to replace the expansion...
Replies
0
Views
604
  • Question
Thanks, that's what I'm hoping for. The main...
Replies
6
Views
505
  • Question
Not designed for the trap upto you in the end...
Replies
3
Views
482
    • Like
  • Question
I would say for the occasional use a ‘normal...
Replies
7
Views
976
Back
Top