Best fix for a pipe repair on a bend? | Air Sourced Heat Pumps | Page 2 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Best fix for a pipe repair on a bend? in the Air Sourced Heat Pumps area at Plumbers Forums

Messages
168
Hello!

Only myself to blame, using the jigsaw as I was taking up the bathroom floorboards and the one board I didn't look under ... Had the H&C feed.

If it was on a straight I'd be quite happy to use these copper patch repairs but as the cut is on a bend I'm assuming you don't get an adequate seal.

What is the recommended fix for this? I don't have a pipe bender so from a cost perspective would prefer to avoid removing and replacing but if that's the recommendation I'll have to make the investment.

20210830_153006.jpg
20210830_150513.jpg
 

Similar plumbing topics

  • Question
Thanks for posting this informative post :)
Replies
1
Views
320
  • Question
From experience - parents had almost exactly...
Replies
5
Views
5K
Should have it done in a day. If you’re a bit...
Replies
5
Views
17K
    • Like
From this post, I think you’ve got a good...
2
Replies
47
Views
6K
Many thanks Shaun. I'm going to put battens on...
Replies
7
Views
2K
Back
Top