Blow torch problem ????

[Best]

That is the super fire 2 mate. It’s a lot at Part centre.

I am actually getting myself a bit confused with Superfire2 and Surefire2 torches. Now not certain which one is with the deal, but I bought one kit, just for the torch as a back up, plus some of the other tools will eventually be needed, obviously like the propane bottle and pipeslice. Tote bag is decent also.

 

[Harvest Fields]

yep but i bet it doesnt cost roth much

Never does. I was surprised when they sent me the service kit for free. That is a good deal. With my pricing it works out to be a bottle and half of free gas. I F*****g hate the blue stuff. Map all the way baby.

 

[ShaunCorbs]

I only use map now but turn it right down so it's like a super candle on 15 and less

 

[Harvest Fields]

I am actually getting myself a bit confused with Superfire2 and Surefire2 torches. Now not certain which one is with the deal, but I bought one kit, just for the torch as a back up, plus some of the other tools will eventually be needed, obviously like the propane bottle and pipeslice. Tote bag is decent also.

The super fire is the daddy mate. In my opinion.

 

[Best]

The super fire is the daddy mate. In my opinion.

Thanks Harvest, I will take a look in morning which one I bought, as now unsure.
If it is just the Surefire2 torch, I am still happy with it at the cost.
Now wanting a Superfire though.

 

[Harvest Fields]

You know what they say mate. Once you go super you never go back...

 

[SimonG]

Mapps only about 11 a canister. Need a new nozzle for mine. Got some solder in the nozzle, got it out but the insert is all to pot and not giving the right flame.

 

[Best]

You know what they say mate. Once you go super you never go back...

That's what my lady tells me.

 

[Harvest Fields]

Mapps only about 11 a canister. Need a new nozzle for mine. Got some solder in the nozzle, got it out but the insert is all to pot and not giving the right flame.

The insert comes with the service kit mate. I will get the part number in the morning if you want it. I pay 12.00 + at the moment. Normally buy a few when on offer

 

[Harvest Fields]

That's what my lady tells me.

Was going to say that’s what she tells me as well but not sure we are on that kind of terms yet though.

 

[Best]

Was going to say that’s what she tells me as well but not sure we are on that kind of terms yet though.

And I hope she isn't on any kind of terms with you!

 

[Best]

The super fire is the daddy mate. In my opinion.

Curiosity got the better of me and I went to my store to see what torch was in my kit. Happy to say, as you can see, it is the Superfire2 , so seems I got a good deal! Also checked my torch I use and discovered it is also the Superfire. I have always thought it was just a Surefire.

 

[Harvest Fields]

Definitely the better one out the two.

 

[Ric2013]

The Surefire, IIRC, has no flame adjustment so it's all or nothing. Bit too powerful for soldering 15mm?

 

[ShaunCorbs]

The Surefire, IIRC, has no flame adjustment so it's all or nothing. Bit too powerful for soldering 15mm?

With blue bottles it's fine

Find the tip a bit smaller than the super

 

[Stigster]

Mapps only about 11 a canister. Need a new nozzle for mine. Got some solder in the nozzle, got it out but the insert is all to pot and not giving the right flame.

In the college I work at we have 10 Superfire 2 torches and as many apprentices using them on a daily basis. They quite frequently get solder inside the nozzle when soldering overhead (with safety specs on of course). I use another torch to blast the blocked nozzle from the outside, getting it nice and hot then just tap the molten solder out. It sorts them out without damaging the swirl pattern vanes inside. If you dig around with a small screwdriver they end up damaged.

 

[Ric2013]

Yes, we were told about safety specs in college, but never saw anyone wearing them! That said, I wear glasses anyway. If I didn't, I'd probably end up trying to solder curtain rails or electrical conduit by mistake.